| 查看: 130 | 回复: 1 | |||
| 当前主题已经存档。 | |||
[交流]
翻译中文文摘为英文（耐火材料）我就这么点金币了
|
|||
|
随着连铸技术的发展，滑板作为连铸控流系统的关键元件，为适应不同操作环境，不同浇注钢种的使用，对其性能要求越来越高。目前广泛使用的是铝锆碳滑板，一般向铝锆碳滑板中添加金属铝粉和硅粉提高滑板的常温性能。 添加硅粉，滑板常温性能提高，但烧成温度也升高，添加铝粉能降低烧成温度，但滑板抗水化性能降低，而通过加入SiO2微粉可以提高滑板抗水化性能。因此研究铝粉和SiO2微粉的添加量对滑板常温性能的影响对进一步降低生产成本和提高滑板性能有重要意义。 本文内容分为如下两个部分： 第一部分为铝粉加入量对铝锆碳滑板性能的影响的研究。对添加不同含量的铝粉的试样进行800℃到1300℃热处理后测试试样的常温性能（常温耐压强度，体积密度，显气孔率，线变化率和重量变化）发现随着铝粉含量的增加，材料的显气孔率减小，体密增大，常温耐压强度增大。 第二部分为SiO2微粉加入量对铝锆碳滑板性能的影响的研究。分别对添加了1%和2%SiO2微粉的试样进行800℃到1300℃热处理后测试试样的常温性能（常温耐压强度，体积密度，显气孔率，线变化率和重量变化）发现添加2%的SiO2微粉能进一步提高材料的常温性能，添加适量的SiO2微粉有助于提高材料的抗水化性能。 关键词： 添加剂，铝锆碳滑板，铝粉，硅粉，SiO2微粉 |
回复此楼» 猜你喜欢
全日制（定向）博士
已经有5人回复
-
假如你的研究生提出不合理要求
已经有10人回复
-
萌生出自己或许不适合搞科研的想法，现在跑or等等看？
已经有4人回复
-
Materials Today Chemistry审稿周期
已经有4人回复
-
参与限项
已经有3人回复
-
实验室接单子
已经有4人回复
-
对氯苯硼酸纯化
已经有3人回复
-
求助:我三月中下旬出站，青基依托单位怎么办？
已经有12人回复
-
所感
已经有4人回复
-
要不要辞职读博？
已经有7人回复
|
With the continuous casting technology, skateboarding as a flow control system for continuous casting of key components, in order to adapt to different operating environment, different kinds of use of cast steel, increasing its performance requirements. Currently widely used aluminum zirconium carbon skateboards, general carbon to aluminum zirconium metal aluminum added skateboards and skateboard silica fume to improve the performance of the normal temperature. Add silica fume, skateboards performance at room temperature, but also increased sintering temperature, add the aluminum to reduce the sintering temperature, but reduce the hydration properties of anti-skateboard, but by adding SiO2 powder can improve the hydration properties of anti-skateboard. The study of aluminum powder and SiO2 addition on room temperature properties of skateboards to further reduce production costs and improve the performance of significance skateboards. This article is divided into two parts as follows: The first part was the amount of aluminum powder of aluminum zirconium carbon skateboard study on the impact of performance. Different content of aluminum powder added sample of 800 ℃ to 1300 ℃ heat treatment after the performance test samples at room temperature (room temperature strength, bulk density, apparent porosity, the rate of change of line and weight change) was found with the aluminum content the increase in apparent porosity of the material decreased, increased body density, increased strength at room temperature. The second part SiO2 powder of aluminum zirconium addition on properties of carbon skateboard research. Were added 1% and 2% SiO2 powder sample of 800 ℃ to 1300 ℃ heat treatment after the performance test samples at room temperature (room temperature strength, bulk density, apparent porosity, the rate of change of line and weight change) was found 2% of the SiO2 powder can further improve the performance of materials at room temperature, add the appropriate amount of SiO2 powder materials help to improve the performance of the anti-hydration. Key words: additives, carbon skateboard aluminum zirconium, aluminum, silica, SiO2 powder |
2楼2009-06-11 20:46:52