| 查看: 387 | 回复: 3 | |||
| 当前主题已经存档。 | |||
zhzouhao铜虫 (著名写手)
|
[交流]
10金币翻译求助。中译音。
|
||
| 本课题主要包括：1）分析国有反渗透膜制备流程中的结构、形态和化学组成变化以及国内外反渗透膜结构、形态和化学组成异同； 2）系统地研究聚砜溶液的溶剂种类、添加剂种类、凝固液组成以及支撑膜厚度等对支撑膜结构以及反渗透膜性能的影响规律；3）系统地研究界面聚合方式、单体种类及浓度、添加剂以及其它界面聚合条件对反渗透膜脱盐层的结构、形态和性能的影响；4）系统地研究防污高分子浓度、交联剂浓度、催化剂浓度以及后处理条件对反渗透膜性能的影响。通过对刮膜工艺条件进行优化、选择合适的致孔剂，研制出从海绵状孔结构到指状孔结构等多形态的支撑膜。采用三相界面聚合法，对聚合单体进行筛选，对聚合条件进行优化。总结了聚合单体、聚合条件对反渗透膜结构、形态和性能的影响规律。采用三相界面聚合法能够制备出表面相对光滑的高脱盐、高水通量的新型复合型反渗透膜。添加剂DMSO的加入能显著提高反渗透膜的水通量，同时对膜的截盐率影响较小。纳米银颗粒原位界面聚合修饰膜表面后，反渗透膜表现出高的水通量和脱盐率，且膜表面光滑。调控防污高分子的浓度、交联剂的浓度以及催化剂的浓度能提高反渗透膜的脱盐层与防污功能层结合力。防污高分子的浓度、交联剂的浓度、催化剂的浓度、反渗透膜与防污溶液的接触时间、后处理温度和后处理时间对反渗透膜的水通量和脱盐率以及反渗透膜表面形态影响很大。 |
回复此楼» 猜你喜欢
求调剂
已经有3人回复
-
材料与化工调剂
已经有4人回复
-
本9一志愿2 0854低分专硕286求调剂
已经有10人回复
-
298求调剂
已经有9人回复
-
材料专业344求调剂
已经有12人回复
-
282，电气工程专业，求调剂，不挑专业
已经有6人回复
-
301求调剂
已经有3人回复
-
一志愿211，化学学硕，310分，本科重点双非，求调剂
已经有28人回复
-
材料085601调剂
已经有17人回复
-
一志愿0703化学招61最终排名62化学求调剂
已经有23人回复
zhzouhao
铜虫 (著名写手)
- 应助: 0 (幼儿园)
- 金币: 5.1
- 散金: 13
- 帖子: 2733
- 在线: 577.6小时
- 虫号: 278011
- 注册: 2006-09-09
- 专业: 高分子材料与环境
2楼2009-06-10 21:57:59
★ ★ ★ ★ ★
zhzouhao(金币+5,VIP+0): 6-11 11:52
zap65535(金币+0,VIP+0):警告 12-23 15:26
zhzouhao(金币+5,VIP+0): 6-11 11:52
zap65535(金币+0,VIP+0):警告 12-23 15:26
| The main topics include: 1) analysis of state-reverse osmosis membrane process in the preparation of the structure, morphology and chemical composition changes as well as domestic and reverse osmosis membrane structure, morphology and chemical composition of the similarities and differences; 2) a systematic study of the solvent polysulfone solution types , additive type, solidified liquid membrane composition and thickness of the support membrane on the support structure and properties of reverse osmosis membrane law; 3) a systematic study of interfacial polymerization method of monomer type and concentration, additives, and other interfacial polymerization conditions on the reverse osmosis desalination membrane layer structure, morphology and properties; 4) a systematic study of anti-fouling polymer concentration, crosslinker concentration, catalyst concentration, as well as post-processing conditions on the reverse osmosis membrane performance. Scratch through the membrane to optimize the process conditions, choose a suitable porogen, developed from the sponge-like pore structure of the finger-like pore structure and other forms of support membrane. The use of three-phase interfacial polymerization, polymerization of monomer on the screen to optimize the polymerization conditions. Summarizes the polymerization of monomer and polymerization conditions on the reverse osmosis membrane structure, morphology and properties of the law. The use of three-phase interfacial polymerization can be prepared by a relatively smooth surface of high-desalination, high water flux of the new composite reverse osmosis membrane. The addition of DMSO additives can significantly improve the reverse osmosis membrane water flux, and salt on the membrane cut-off rate was less affected. Nano-silver particles in situ interfacial polymerization surface modification, the reverse osmosis membrane showed a high rate of water flux and desalination, and membrane surface. Control anti-fouling polymer concentration, crosslinker concentration and the concentration of the catalyst can improve the reverse osmosis desalination membrane fouling layer and function layer bonding. Anti-fouling polymer concentration, crosslinker concentration, catalyst concentration, reverse osmosis membrane with the anti-fouling solution contact time, temperature and post-processing after the processing time of reverse osmosis membrane and desalination of water flux rates, and reverse osmosis membrane a great influence on surface morphology. |
3楼2009-06-11 10:30:30
4楼2009-06-11 10:45:50
