| 查看: 140 | 回复: 1 | |||
| 当前主题已经存档。 | |||
迈步从头越
|
[交流]
求助：准确翻译一段话
|
||
|
The reactions were carried out at atmospheric pressure by continuously passing a gaseous feed containing pure methane and carbon dioxide (CO2/CH4 mole ratio=1.1) over the catalyst (0.3 g) packed in a quartz tubular reactor, provided with a thermocouple in the catalyst bed, at different GHSVs (gas hourly space velocity, measured at 0 °C and 1 atm pressure) and temperatures. The reactor effluent gases were cooled to about 2 °C using a coiled condenser immersed in the ice-water slurry to remove the water from the product gases. The reaction products were analyzed by a gas chromatograph with a thermal conductivity detector using a Spherocarb column. The carbon deposited on the catalyst during the reaction was determined by oxidizing it to CO2 in a flow of air (60 cm3 min-1) for a period of2h at 800 °C. The CO2 formed in the oxidation step was absorbing in barium hydroxide solution to form barium carbonate which was then estimated gravimetrically.  |
回复此楼» 猜你喜欢
材料调剂
已经有4人回复
-
面上模板改不了页边距吧？
已经有6人回复
-
307求调剂
已经有6人回复
-
304求调剂
已经有5人回复
-
317一志愿华南理工电气工程求调剂
已经有8人回复
-
272求调剂
已经有3人回复
-
化工专硕348，一志愿985求调剂
已经有6人回复
-
292求调剂
已经有3人回复
-
290求调剂
已经有6人回复
-
295求调剂
已经有5人回复
★ ★ ★ ★ ★ ★
迈步从头越(金币+6,VIP+0): 5-29 14:37
迈步从头越(金币+6,VIP+0): 5-29 14:37
| 反应在不同空速（气体空速，在0 °C 和 1 atm下测定）和温度下进行，反应压力为常压，反应在管式石英反应器中进行，温度由插入催化剂床层的热电偶控制，反应原料为纯CH4和CO2的混合气体（CO2/CH4 的摩尔比为1.1），催化剂装填量为0.3g。反应尾气通过浸在 冰水混合物中的蛇形冷凝管，冷凝至2 °C从而除去气相产物中的水蒸气。反应产物采用气相色谱分析，色谱配备热导检测器和Spherocarb色谱柱。反应后的催化剂在空气中（空气流速60 cm3 min-1）于800 °C煅烧2h，使得反应过程中催化剂上产生的积碳氧化生成CO2, 从而测定催化剂上的积碳量。氧化产生的CO2被氢氧化钡溶液吸收生成碳酸钡沉淀从而可以对其定量分析。 |
2楼2009-05-29 14:08:41
