24小时热门版块排行榜    

CyRhmU.jpeg
查看: 1325  |  回复: 12
当前只显示满足指定条件的回帖,点击这里查看本话题的所有回帖

Xfrag

捐助贵宾 (小有名气)


[交流] 连续动态再结晶与层错能的关系

请教大家,一般说层错能低的材料在动态再结晶过程中趋于非连续动态再结晶,而层错能高的材料趋于连续动态再结晶,这里面的机理是什么呢?

层错能高易于交滑移,不易产生晶界迁移,但是为什么趋于连续而非不连续动态再结晶的原理还是不太明白。
回复此楼

» 猜你喜欢

» 本主题相关商家推荐: (我也要在这里推广)

» 抢金币啦!回帖就可以得到:

查看全部散金贴

已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

帐棚

银虫 (正式写手)



Xfrag(金币+1): 谢谢参与
3楼2019-05-01 10:33:05
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖
查看全部 13 个回答

星火abcd

至尊木虫 (著名写手)


★ ★
Xfrag(金币+1): 谢谢参与
Xfrag: 金币+1 2019-05-05 09:31:26
A review of dynamic recrystallization phenomena in metallic materials
2.2.1. Stacking fault energy
In summary, the SFE determines the width of stacking fault which
influences the level of dislocations dissociation into partial dislocations.
Low γSFE promotes such a dissociation reactionwhich hinders the climb
and cross slip of dislocations, i.e., retards DRV. This explains why CDRX
and GDRX are generally observed for high γSFE while DDRX is expected
for materials with low γSFE. It should be emphasized that γSFE is not the
only factor to determine which type of DRX processes will take place
during hot deformation, other influencing factors, which also play important
roles in DRX, will be discussed in the following sections.
4楼2019-05-01 17:42:12
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

dugu_00

铜虫 (正式写手)



Xfrag(金币+1): 谢谢参与
个人认为层错能不是直接影像因素,而是变形结构的非均匀性导致了不均匀形核的再结晶。而大变形量下的非均匀变形组织多为低层错能所导致。

发自小木虫IOS客户端
5楼2019-05-01 21:26:09
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖
简单回复
longwave2楼
2019-05-01 10:24   回复  
Xfrag(金币+1): 谢谢参与
祝福 发自小木虫Android客户端
普通表情 高级回复(可上传附件)
信息提示
请填处理意见