24小时热门版块排行榜    

查看: 8218  |  回复: 34
【有奖交流】积极回复本帖子,参与交流,就有机会分得作者 guozhilin123 的 5 个金币

guozhilin123

铜虫 (小有名气)

[交流] 论文被拒了5次 本人提供编辑回复的意见 求老师给点分析意见 唉...........已有9人参与

论文投稿5次  就第一acta materillia 给了具体建议,其他的都没给建议,说什么出版空间有限,请问大家 这到底怎么个情况
1、杂志material and design
Thank you for your interest and submission to "Materials and Design". Unfortunately, after an initial evaluation, I feel your manuscript is not suitable for this journal's readership.

However, I do think it could be considered by another journal, and I would like to suggest that you take advantage of the article transfer service that "Materials and Design" is part of. This gives you the option to have your manuscript files and details transferred to another journal. This removes the need for you to resubmit and reformat your manuscript, saving you valuable time and effort during the submission process.

If you click the link below you will find relevant information about the journal(s) to which I recommend transferring your submission. You have the option to accept or decline the transfer offer from the same web page:
http://ees.elsevier.com/jmad/l.asp?i=360005&l=1ZQISXSQ

This offer does not constitute a guarantee that your paper will be published in the suggested Journal, but it is our hope that this arrangement will help expedite the process for promising papers.

To learn more about the new article transfer service, please visit
www.elsevier.com/authors/article-transfer-service

Yours sincerely,
Arthur Geoffrey Gibson
Editor
Materials and Design
2、material science and engineering A
I have examined your manuscript which was submitted for publication in Materials Science & Engineering A, and I do not believe that MSE A is the appropriate journal for this paper. This decision is not intended to reflect on the merits of your work; however, the focus of the present submission falls outside of the journal's current scope: Materials Science & Engineering A provides an international medium for the publication of theoretical and experimental studies related to the load-bearing capacity of materials as influenced by their basic properties, processing history, microstructure and operating environment. Appropriate submissions to Materials Science & Engineering A should include scientific and/or engineering factors which affect the microstructure - strength relationships of materials and report the changes to mechanical behavior.

Thank you for considering MSE A, but we are not able to give your manuscript the attention or review that it deserves.

Yours sincerely,

Enrique Lavernia
Editor in Chief
Materials Science & Engineering A

Additional Editor review comments will be included below if available:

The authors may want to consider submission to a more appropriate journal that is interested in materials processing.
3、 journal of alloys and compounds
Thank you for submitting your manuscript for publication in the Journal of Alloys and Compounds. Owing to the restricted publication space assigned by the Publisher to us, we presently receive much more valuable papers than we can publish. For this reason all submitted papers are subjected to an initial screening process, and our standard in-depth review procedure will be applied only to those papers that most likely will eventually be published in the Journal of Alloys and Compounds.

Regretfully, I have to inform you that your paper was not given a high priority rating during the initial screening process and consequently we will not be able to send it out for in-depth review. We are therefore notifying you directly so that you can submit your paper for publication elsewhere. In addition to the usual criteria for publication, the initial selection procedure concentrates mainly on novelty and general significance. We wish to emphasize that our decision represents essentially not a rating of the scientific or technological merit of your paper but rather reflects our limited publication space.

Yours sincerely,

Vitalij K. Pecharsky
Editor
Journal of Alloys and Compounds
4、 journal of materials science and technology
We are writing you in regards to manuscript # JMST-2016-2154 entitled "An Al-7Si alloy/cast iron bimetallic composite with super-high shear strength" which you submitted to the Journal of Materials Science & Technology.

Actually, too many submissions reach our journal, but most of them has to be ignored because of our limited publication capacity, although most of them are novel and interesting. So, we try to give authors a reply as soon as possible to ensure that they can submit their papers elsewhere at most early time.

Based on the consideration above, at this time we are regretful to suggest you submit your manuscript to other journals.

Thank you for considering the Journal of Materials Science & Technology for the publication of your research.  We hope the outcome of this specific submission will not discourage you from the submission of future manuscripts.

Sincerely,

Editorial Office
Journal of Materials Science & Technology
回复此楼
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖
回帖支持 ( 显示支持度最高的前 50 名 )

paperhunter

荣誉版主 (文学泰斗)

还没想好

优秀版主优秀版主优秀版主优秀版主优秀版主优秀版主优秀版主

引用回帖:
6楼: Originally posted by guozhilin123 at 2016-10-23 20:34:21
请问 如果图片格式出现问题 会不会出现这样的结果呢...

拒稿的原因一般有专业方向不符,原创性不够,工作不深入不系统,专业性太强受众有限等。还有一个原因,就是近期研究方向相似的论文接收的数量较多,为了平衡而拒稿。楼主可以从这些方面找找原因,图片格式出现问题,一般不是拒稿的理由。
咱也是有组织的人了...
9楼2016-10-23 23:08:38
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

自私的猫1988

荣誉版主 (文坛精英)

优秀版主优秀版主优秀版主优秀版主优秀版主优秀版主

★ ★ ★ ★
guozhilin123(liouzhan654代发): 金币+4, 感谢交流 2016-10-23 20:29:13
1. material and design
拒稿,给提供转投它刊的机会,楼主可以考虑一下

2. material science and engineering A
编辑说了半天,说明楼主文章不适合在期刊发表

3. journal of alloys and compounds
只是拒稿的委婉说辞

4. journal of materials science and technology
同样拒稿的委婉说辞

从以上意见来看,楼主对文章的适合期刊和档次定位可能有点小问题
2楼2016-10-23 19:23:11
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

cqupenghao

木虫 (著名写手)


guozhilin123(liouzhan654代发): 金币+1, 感谢交流 2016-10-23 20:29:19
这些完全都是拒稿的模板格式,所以楼主再接再励吧,该投其他期刊
做事先做人,以诚为本!
3楼2016-10-23 19:32:00
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

goshen

铁杆木虫 (职业作家)

好执着啊,反思一下自己的工作吧

发自小木虫Android客户端
走错一步,满盘皆输
23楼2016-10-25 11:12:32
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖
普通回帖

candy0066

禁虫 (正式写手)

本帖内容被屏蔽

4楼2016-10-23 20:04:43
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

mxnjfu

新虫 (知名作家)

5楼2016-10-23 20:25:19
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

guozhilin123

铜虫 (小有名气)

引用回帖:
2楼: Originally posted by 自私的猫1988 at 2016-10-23 19:23:11
1. material and design
拒稿,给提供转投它刊的机会,楼主可以考虑一下

2. material science and engineering A
编辑说了半天,说明楼主文章不适合在期刊发表

3. journal of alloys and compounds
只是拒 ...

请问 如果图片格式出现问题 会不会出现这样的结果呢
6楼2016-10-23 20:34:21
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

guozhilin123

铜虫 (小有名气)

引用回帖:
3楼: Originally posted by cqupenghao at 2016-10-23 19:32:00
这些完全都是拒稿的模板格式,所以楼主再接再励吧,该投其他期刊

会不会我是格式问题 出现问题了呢  给拒稿??
7楼2016-10-23 20:34:54
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖
8楼2016-10-23 23:02:22
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

cqupenghao

木虫 (著名写手)

引用回帖:
7楼: Originally posted by guozhilin123 at 2016-10-23 20:34:54
会不会我是格式问题 出现问题了呢  给拒稿??...

不是格式的问题,是文章的问题

发自小木虫Android客户端
做事先做人,以诚为本!
10楼2016-10-23 23:11:09
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖
相关版块跳转 我要订阅楼主 guozhilin123 的主题更新
普通表情 高级回复(可上传附件)
最具人气热帖推荐 [查看全部] 作者 回/看 最后发表
[有机交流] 求助 10+6 脂质纳米粒 2024-06-20 8/400 2024-06-22 13:47 by lxs7405
[催化] 求助原位红外 +3 jfdhj 2024-06-21 5/250 2024-06-22 09:35 by jfdhj
[精细化工] 切削液交流群 +7 SZ吴彦祖 2024-06-17 7/350 2024-06-22 08:54 by gemini_li
[基金申请] 国自然青年基金,1A4B能上会吗?青年和面上的上会标准是一样的吗? +16 今晚推荐22 2024-06-20 22/1100 2024-06-22 08:46 by wwwwww007
[考博] 有机化学迷茫学生 +5 佛系摸鱼5 2024-06-18 10/500 2024-06-21 23:54 by 佛系摸鱼5
[考博] 一名额难求啊 +10 pinbo拼搏 2024-06-19 10/500 2024-06-21 23:17 by ffffjjjj
[基金申请] 教育部基金 +5 m1393 2024-06-21 5/250 2024-06-21 21:13 by odes
[基金申请] 工材口青年基金大概什么样能上会? +14 今晚推荐22 2024-06-20 20/1000 2024-06-21 20:28 by 今晚推荐22
[基金申请] 听大佬说今年信息口本子数量大幅增加? +8 wutzxt 2024-06-21 9/450 2024-06-21 19:58 by wutzxt
[基金申请] 有人中过人文社科类的博后特助吗? +4 outsider1986 2024-06-16 7/350 2024-06-21 09:54 by kyukitu
[有机交流] 怎么萃取出锡盐内包裹的化合物 +4 硕六过 2024-06-19 5/250 2024-06-21 09:50 by 光超嘟嘟
[基金申请] 江苏省333人才工程 出校后被刷的概率大不大? +4 maxbirdzhang 2024-06-19 5/250 2024-06-21 08:57 by maxbirdzhang
[精细化工] 试剂价格 +7 旭必上岸 2024-06-17 10/500 2024-06-20 23:35 by 相与处于陆的鱼
[基金申请] 我标书代码变了 +63 学员NHuqdk 2024-06-16 86/4300 2024-06-20 22:03 by 841790061
[考博] 关于读博感觉自己很抓马 +9 小九月 2024-06-19 12/600 2024-06-20 11:06 by SCITOPPP
[基金申请] 太卷了 +14 laoyuefubio 2024-06-17 27/1350 2024-06-20 09:52 by htjwqy
[海外博后] 墨尔本大学博后offer要不要接 +3 kyxblmm 2024-06-18 3/150 2024-06-19 22:39 by blake1111
[基金申请] F口信息学部拿面上,大概需要什么样的成果 +7 _奋黎_ 2024-06-16 18/900 2024-06-19 20:02 by _奋黎_
[高分子] 寻找聚酯反应釜 +3 茕茕恭煮 2024-06-15 6/300 2024-06-18 14:15 by 茕茕恭煮
[高分子] 烧瓶内合成聚酯 +3 大帝国乐 2024-06-17 7/350 2024-06-18 11:10 by 大帝国乐
信息提示
请填处理意见