24小时热门版块排行榜    

查看: 624  |  回复: 2
本帖产生 1 个 翻译EPI ,点击这里进行查看
当前只显示满足指定条件的回帖,点击这里查看本话题的所有回帖

rpwtzzl

铜虫 (小有名气)

[求助] 求助一段摘要翻译

求助一段摘要翻译成英文

冷轧430铁素体不锈钢经过略低于再结晶温度长时间保温,再高温再结晶退火后能获得高份额的γ-纤维织构。这种高份额的γ-纤维织构的获得主要归因于大冷轧形变量和形变组织的充分回复。随着保温时间的延长,其织构强度逐渐增加,样品的织构类型基本没有变化。这种热处理制度处理的样品与直接退火的样品相比有着更高的γ-纤维织构和更少的{211}<011>织构。但两种退火制度都难以去除形变储能较低的{100}<011>旋转立方织构晶粒。
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

武汉一心一译

捐助贵宾 (著名写手)


【答案】应助回帖

商家已经主动声明此回帖可能含有宣传内容
★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★
rpwtzzl: 金币+20, 翻译EPI+1, ★★★★★最佳答案 2016-05-06 14:35:27
冷轧430铁 素体不锈钢 经过 略低于 再结晶温度 长时间 保温,再高温 再结晶 退火 后 能获 得高份额 的γ-纤维织构。这种 高份额的 γ-纤维织构的 获得 主要归因于 大冷轧形变量 和 形变组织的 充分回复。随着 保温时间的 延长,其 织构强度 逐渐增加,样品的 织构类型 基本没有变化。这种 热处理制度 处理的 样品 与 直接退火的 样品相比 有着 更高的 γ-纤维织构 和 更少的{211}<011>织构。但 两种 退火制度 都难以 去除 形变储能 较低的 {100}<011>旋转立方织构 晶粒。
Cold-rolled 430 ferritic stainless steel is firstly subjected to long time of thermal insulation at temperature which is slightly lower than recrystallization temperature, and then subjected to high temperature recrystallization annealing before obtaining high share of γ-fiber texture. The reason for obtaining such high share of γ-fiber texture is mainly due to large cold rolling deformation and full response to deformed microstructure. As the extending of holding time, the texture intensity gradually increase while the texture types of sample remain roughly unchanged. Compared with sample under direct annealing, sample under such heat-treatment mechanism has higher γ-fiber texture and less {211}<011> texture. However, both annealing mechanisms can hardly remove {100}<011> rotating cube texture grain of lower deformation stored energy.
3楼2016-05-03 11:17:39
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖
查看全部 3 个回答

weijun.deng

木虫 (知名作家)

【答案】应助回帖

一般是付费完成的吧
2楼2016-05-02 22:55:04
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖
信息提示
请填处理意见