[求助] 氧化锌防腐测试 已有1人参与

我是电化学小白，最近在做氧化锌防腐。阻抗测试方法是参考的文献上的，如下： The cleaned steel specimens (1 cm2) were exposed to the 3.50 wt% NaCl solutions without and with X NPs for different immersion times.  The test was performed by IM6e electrochemical workstation (Zahner-Electrik, Germany) in a three electrode cell including steel specimen as working electrode, platinum as counter electrode and saturated Hg/HgO as reference electrode. The frequency range and perturbation of the measurements were 10 kHz-100 mHz and±10 mV, respectively. 但是测试结果和文献中的数据在横纵坐标上有差异。图1为我测的数据。 文献上半圆的半径大概1000左右，而我测的才100左右。 想请教大神：我这样的数据有问题吗？ 1.jpg

回复此楼