24小时热门版块排行榜    

查看: 909  |  回复: 4
当前只显示满足指定条件的回帖,点击这里查看本话题的所有回帖

luffy322122

木虫 (正式写手)

科研小虫~

[交流] 完了,审稿回复出现错误!!!!!!!!! 已有2人参与

现在是二审阶段了(审稿人一还有两个主要问题,审稿人二已经没有意见了……),对于其中一个问题,回答后又加了补充(从besides开始),补充的计算其实是额外的(也可以不用写的),补充计算中的弹性模量E被我想当然的写成了2.06E9了,其实是2.06E11~
Fig. 6 is obtained by Tylor Hobson CCI (UK) with nanometer resolution. As shown in Table 2, the wear depth and wear width are within 6 μm and 1 mm, respectively. Thus, the slider surface can still be regarded as flat and the Hertz solution is still applicable. Besides,Figure 2 shows the contact between the roller and the slider. The indentation depth is linearly proportional to the contact force, which can be written as [7]
d=4F/(3.14EL)=(4×151)/(3.14×2.06×〖10〗^9×0.007)≈13.34μm
The indentation width can be obtained as [9]
2a=2√2Rd=2√(2×0.02×13.34×〖10〗^(-6) )≈1.461mm
The wear depth (5.418 μm) is less than the indentation depth (13.34 μm) and the wear width (0.931 mm) is also less than the indentation width (1.461 mm). Thus the Hertz solution is still applicable.

这样的话,我计算结果是不能用来说明问题的(也就是说besides之后是不正确的),可是我的二审回复意见以及修改稿已经提交了……现在修改不了了,怎么办啊!!!!审稿人看到会不会直接拒稿吧!!!!天哪……怎么办啊……急死了…………
PS:这里的说明在manuscript中没有出现!而且也不是审稿人的两个主要问题……
回复此楼
Nothingcanstandinmyway
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

luffy322122

木虫 (正式写手)

科研小虫~

引用回帖:
2楼: Originally posted by pingcne at 2015-07-31 21:55:53
不是主要问题,审稿人估计不会深究。应该没啥事

希望如此吧,谢谢
Nothingcanstandinmyway
4楼2015-08-01 08:58:48
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖
查看全部 5 个回答

pingcne

木虫 (正式写手)


小木虫: 金币+0.5, 给个红包,谢谢回帖
不是主要问题,审稿人估计不会深究。应该没啥事
2楼2015-07-31 21:55:53
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

adnano

金虫 (小有名气)


小木虫: 金币+0.5, 给个红包,谢谢回帖
可以写信和编辑说一下,没送审或者编辑人好,还可以改的。

[ 发自小木虫客户端 ]
3楼2015-08-01 00:17:07
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

luffy322122

木虫 (正式写手)

科研小虫~

引用回帖:
3楼: Originally posted by adnano at 2015-08-01 00:17:07
可以写信和编辑说一下,没送审或者编辑人好,还可以改的。

已经处于under review中了~
Nothingcanstandinmyway
5楼2015-08-01 08:59:12
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖
普通表情 高级回复 (可上传附件)
信息提示
请填处理意见