| 查看: 1177 | 回复: 13 | ||||
| 【奖励】 本帖被评价12次，作者ffl_2010增加金币 9.4 个 | ||||
[资源]
A Reassessment of Heavy Duty Truck Aerodynamic Design Features and Priorities
|
||||
|
Between 1973 and 1982, the NASA Dryden Flight Research Center conducted “coast-down” tests demonstrating means for reducing the drag of trucks, buses, and motor homes. Numerous configurations were evaluated using a box-shaped test van, a two-axle truck, and a tractor-semitrailer combination. Results from three configurations of the test van are of interest now in view of a trucking industry goal of a 0.25 drag coefficient for tractor-semitrailer combinations. Two test van configurations with blunt-base geometry, similar to present day trucks (one configuration has square front corners and the other has rounded front corners), quantify the base drag increase associated with reduced forebody drag. Hoerner’s equations predict this trend; however, test van results, reinforced by large-scale air vehicle data, indicate that Hoerner’s formula greatly underestimates this dependence of base drag on forebody efficiency. The demonstrated increase in base drag associated with forebody refinement indicates that the goal of a 0.25 drag coefficient will not be achieved without also reducing afterbody drag. A third configuration of the test van had a truncated boattail to reduce afterbody drag and achieved a drag coefficient of 0.242. These results are included here and references are identified for other means of reducing afterbody drag. |
回复此楼» 本帖附件资源列表
-
欢迎监督和反馈：小木虫仅提供交流平台，不对该内容负责。
本内容由用户自主发布，如果其内容涉及到知识产权问题，其责任在于用户本人，如对版权有异议，请联系邮箱：xiaomuchong@tal.com - 附件 1 : A_Reassessment_of_Heavy-Duty_Truck_Aerodynamic_Design_Features_and_Priorities.pdf
2015-07-27 23:57:43, 3.35 M
» 收录本帖的淘帖专辑推荐
 机械科研经验专辑 |
» 猜你喜欢
燕山大学机械工程学院Marian Wiercigroch院士团队招收2026年博士5人
已经有0人回复
-
公派CSC联合培养博士生
已经有10人回复
-
金属材料论文润色/翻译怎么收费?
已经有58人回复
-
关于位错的定义的疑问
已经有0人回复
-
细晶强化及其应用相关的课件
已经有0人回复
-
细晶强化及其应用相关的课件
已经有0人回复
-
微合金钢的固溶温度的确定公式
已经有1人回复
-
中国地质大学（北京）工程技术学院薛启龙课题组招收2026年博士生
已经有3人回复
-
关于30°不全位错的柏氏回路的绘制
已经有0人回复
-
解决渗碳体倾斜角度问题
已经有0人回复
2楼2015-07-28 00:49:43
11楼2015-07-28 19:03:51
简单回复
supervb3楼
2015-07-28 06:57
回复
五星好评 顶一下，感谢分享！
2015-07-28 09:04
回复
五星好评 顶一下，感谢分享！
2015-07-28 09:20
回复
五星好评 顶一下，感谢分享！
jyhustb6楼
2015-07-28 09:24
回复
五星好评 顶一下，感谢分享！
zjys58877楼
2015-07-28 13:24
回复
五星好评 顶一下，感谢分享！
持之以恒95278楼
2015-07-28 13:34
回复
五星好评 顶一下，感谢分享！
dhf6549楼
2015-07-28 13:46
回复
五星好评 顶一下，感谢分享！
tongren10楼
2015-07-28 15:57
回复
五星好评 顶一下，感谢分享！
daniel_xu12楼
2015-07-28 20:05
回复
五星好评 顶一下，感谢分享！
cuiguoyi13楼
2018-01-19 12:06
回复
五星好评 顶一下，感谢分享！
gym964314楼
2019-01-06 14:09
回复
五星好评 顶一下，感谢分享！