24小时热门版块排行榜    

查看: 657  |  回复: 3

xuyingemail

新虫 (小有名气)

[求助] TiO2 水溶物含量测定

USP37-NF32中有规定TiO2中水溶物含量测定的方法(见下方),但是我不明白为什么要加氯化铵?哪位英雄可以帮忙解答?

WATER-SOLUBLE SUBSTANCES
Sample suspension: Suspend 4.0 g TiO2 in 50 mL of water,mix, and allow to stand overnight.
Analysis: Transfer the Sample suspension to a 200-mL volumetric flask, add 2 mL of ammonium chloride TS, and mix. If the Titanium Dioxide does not settle, add another 2-mL portion of ammonium chloride TS. Allow the suspension to settle, dilute with water to volume, mix, and pass through a double thickness of fine-porosity filter paper, discarding the first 10 mL of filtrate.  Collect 100 mL of the clear filtrate, transfer to a tared platinum dish, evaporate on a hot plate to dryness, and ignite at a dull red heat to constant weight.
Acceptance criteria: The residue weighs NMT 5 mg (NMT 0.25%).
回复此楼
已阅   关注TA 给TA发消息 送TA红花 TA的回帖

archbishop

禁虫 (职业作家)

优秀版主

氯化铵是絮凝剂,也可以加其他的,中国药典好象是硫酸铵还是碳酸铵记不清了。因为一部分二氧化钛粉末会形成胶体,由于二氧化钛胶体颗粒带负电,铵根离子带正电,加进去之后胶体就会沉淀下来。

» 本帖已获得的红花(最新10朵)

雲幕低垂映桂子,江月留白問柳心。
2楼2015-03-03 14:38:59
已阅   关注TA 给TA发消息 送TA红花 TA的回帖

xuyingemail

新虫 (小有名气)

送红花一朵
引用回帖:
2楼: Originally posted by archbishop at 2015-03-03 14:38:59
氯化铵是絮凝剂,也可以加其他的,中国药典好象是硫酸铵还是碳酸铵记不清了。因为一部分二氧化钛粉末会形成胶体,由于二氧化钛胶体颗粒带负电,铵根离子带正电,加进去之后胶体就会沉淀下来。

非常感谢亲的解释,送红花一朵聊表谢意!
3楼2015-03-03 14:52:28
已阅   关注TA 给TA发消息 送TA红花 TA的回帖

archbishop

禁虫 (职业作家)

优秀版主

引用回帖:
3楼: Originally posted by xuyingemail at 2015-03-03 14:52:28
非常感谢亲的解释,送红花一朵聊表谢意!...

不谢
雲幕低垂映桂子,江月留白問柳心。
4楼2015-03-03 14:55:11
已阅   关注TA 给TA发消息 送TA红花 TA的回帖
相关版块跳转 我要订阅楼主 xuyingemail 的主题更新
信息提示
请填处理意见