| 查看: 1783 | 回复: 9 | |||
| 当前主题已经存档。 | |||
| 当前只显示满足指定条件的回帖，点击这里查看本话题的所有回帖 | |||
追忆似水流年木虫 (小有名气)
|
[交流]
100金币求助翻译（化工方面）
|
||
|
本文将改性后的SiO2粉体与制备的甲基硅树脂微球添加到涂层中，用扫描电镜和接触角仪分析涂层形貌和疏水型的变化。考察了疏水剂在不同涂层基料 中对疏水性的影响，结果表明：在涂层中添加改性后的SiO2与甲基硅树脂微球时，由于提高了涂层表面的粗糙度，故增强了涂层的疏水性。当基料为硅丙乳液时，涂层对水接触角分别为114.87˚和106.12˚；当基料为苯丙乳液时，涂层对水接触角分别为110.92˚和106.18˚；当基料为含氢硅油时，涂层对水接触角分别为124.28˚和130.39˚。在涂层中添加混合疏水剂，比使用单一疏水剂的疏水强，在硅丙涂层中，水接触角为117.02˚，苯丙涂层中，水接触角为115.53˚，当在含氢硅油涂层中时，涂层表面形成微米纳米相结合的阶层结构，大大提高了疏水性，水接触角为137.6˚。 |
回复此楼» 猜你喜欢
时间戳又变了
已经有19人回复
-
建议基金发布提前给出明确的时间点
已经有4人回复
-
filecode，4个jtjc了
已经有14人回复
-
看来今天不会放榜了？
已经有9人回复
-
让我中一个面上吧！
已经有13人回复
-
人气不行了
已经有7人回复
-
今日不放榜？网传国自然预计 8 月 27 日可查结果
已经有18人回复
-
感觉是下周放榜了
已经有12人回复
-
我面上完蛋了
已经有8人回复
-
只有每年这种时候来逛逛小木虫
已经有25人回复
wang17152
木虫 (知名作家)
- 应助: 0 (幼儿园)
- 贵宾: 0.07
- 金币: 20573.2
- 散金: 163
- 红花: 2
- 沙发: 4
- 帖子: 5652
- 在线: 133.3小时
- 虫号: 548649
- 注册: 2008-04-19
- 性别: GG
- 专业: 化学反应工程
又稍作了修改，问题不大了，o(∩_∩)o...
|
本文将改性后的SiO2粉体与制备的甲基硅树脂微球添加到涂层中，用扫描电镜和接触角仪分析涂层形貌和疏水型的变化。考察了疏水剂在不同涂层基料中对疏水性的影响，结果表明：在涂层中添加改性后的SiO2与甲基硅树脂微球时，由于提高了涂层表面的粗糙度，故增强了涂层的疏水性。当基料为硅丙乳液时，涂层对水接触角分别为114.87˚和106.12˚；当基料为苯丙乳液时，涂层对水接触角分别为110.92˚和106.18˚；当基料为含氢硅油时，涂层对水接触角分别为124.28˚和130.39˚。在涂层中添加混合疏水剂，比使用单一疏水剂的疏水强，在硅丙涂层中，水接触角为117.02˚，苯丙涂层中，水接触角为115.53˚，当在含氢硅油涂层中时，涂层表面形成微米纳米相结合的阶层结构，大大提高了疏水性，水接触角为137.6˚。 This article added the modified SiO2 powder and the prepared methyl silicone microspheres in the coat, and analyzes the variation of the pattern of the coat and the hydrophobe by using the electro-scanning microscopy and the contact-angle PCR. Investigate the impact caused by hydrophobe in different ground-coat to hydrophobic, the results showed that add the modified SiO2 and the methyl silicone microspheres in coat, and because of increased the roughness of the coat surface, thus enhanced the hydrophobic of coat. As the base material is the silicone-acrylic latex, the contact angle between the coat and the water are 114.87˚ and 106.12˚; As the base material is styrene-acrylic emulsion, the contact angle between the coat and the water are 110.92 ˚ and 106.18 ˚; As the base material is Hydrogen silicone oil, the contact angle between the coat and the water are 124.28 ˚ and 130.39 ˚. The hydrophobic added hydrophobe mixture in the coat is stronger than in single hydrophobe, the contact angle of water is 117.02˚ in the coat of silicone-acrylic, and 115.53˚ in the coat of styrene-acrylic, when in the oil of hydrogen Silicon coat, the circles structure conjunct in micron and millimicron are formed, obviously improved the hydrophobic, and the contact angle of water is 137.6˚ |
3楼2008-05-27 21:47:55
wang17152
木虫 (知名作家)
- 应助: 0 (幼儿园)
- 贵宾: 0.07
- 金币: 20573.2
- 散金: 163
- 红花: 2
- 沙发: 4
- 帖子: 5652
- 在线: 133.3小时
- 虫号: 548649
- 注册: 2008-04-19
- 性别: GG
- 专业: 化学反应工程
坐个沙发，感觉不难，o(∩_∩)o...
★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★
追忆似水流年(金币+50,VIP+0):非常感谢第一个帮忙翻译的
追忆似水流年(金币+50,VIP+0):非常感谢第一个帮忙翻译的
|
本文将改性后的SiO2粉体与制备的甲基硅树脂微球添加到涂层中，用扫描电镜和接触角仪分析涂层形貌和疏水型的变化。考察了疏水剂在不同涂层基料中对疏水性的影响，结果表明：在涂层中添加改性后的SiO2与甲基硅树脂微球时，由于提高了涂层表面的粗糙度，故增强了涂层的疏水性。当基料为硅丙乳液时，涂层对水接触角分别为114.87˚和106.12˚；当基料为苯丙乳液时，涂层对水接触角分别为110.92˚和106.18˚；当基料为含氢硅油时，涂层对水接触角分别为124.28˚和130.39˚。在涂层中添加混合疏水剂，比使用单一疏水剂的疏水强，在硅丙涂层中，水接触角为117.02˚，苯丙涂层中，水接触角为115.53˚，当在含氢硅油涂层中时，涂层表面形成微米纳米相结合的阶层结构，大大提高了疏水性，水接触角为137.6˚。 This article added the modified SiO2 powder and the prepared methyl silicone microspheres to the coat, and analyzes the variation of the pattern of the coat and the hydrophobe by using the electro-scanning microscopy and the contact-angle PCR. Investigate the hydrophobic property impact by hydrophobe in different ground-coat, the results showed that add the modified SiO2 and the methyl silicone microspheres in coat, and because of increased the roughness of the coat surface, enhanced the hydrophobic of coat. As the base material is the silicone-acrylic latex, the contact angle between the coat and the water are 114.87˚ and 106.12˚; As the base material is styrene-acrylic emulsion, the contact angle between the coat and the water are 110.92 ˚ and 106.18 ˚; As the base material is Hydrogen silicone oil, the contact angle between the coat and the water are 124.28 ˚ and 130.39 ˚. The hydrophobic added hydrophobe mixture in the coat is stronger than in single hydrophobe, the contact angle of water is 117.02˚ in the coat of silicone-acrylic, and 115.53˚ in the coat of styrene-acrylic, when in the oil of hydrogen Silicon coat, the circles structure conjunct in micron and millimicron are formed, obviously improved the hydrophobe, the contact angle of water is 137.6˚. |
2楼2008-05-27 21:32:52
不足之处，还请高人指正
★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★
追忆似水流年(金币+25,VIP+0):谢谢哦
追忆似水流年(金币+25,VIP+0):谢谢哦
| In this paper, we added the modified SiO2 particles and prepared methyl silicone resin microspheres into the coatings. The morphology of the coatings was studied by SEM, while the hydrophobic variation was measured by a contact angle instrument. The influence of hydrophobe in different coating base materials on hydrophobicity was also investigated. The results showed that the hydrophobicity of the coatings was elevated by the improved roughness after the adding of the modified SiO2 and prepared methyl silicone resin microspheres into the coatings. When silicone/acrylic latex was used as base material, the contact angles of the coatings to water were 114.87˚ and 106.12˚ separately; while for styrene/acrylic latex, that angles were 110.92˚ and 106.18˚ separately; and when the base material was changed to hydrogen silicone fluid, that angles were 124.28˚ and 130.39˚separately. The combination of hydrophobe had a stronger (better 应该也可以) hydrophobicity than single hydrophobe. In the silicone/acrylic coatings, the water contact angle was 117.02˚; while in the styrene/acrylic coatings, that angle was 115.53˚; and in the coatings which hydrogen silicone fluid was used, the hydrophobicity was highly improved due to the layered structure of micro-nano combined phases, and the water angle was 137.6˚. |
4楼2008-05-27 22:05:16
liuyelide
木虫 (正式写手)
- 应助: 0 (幼儿园)
- 金币: 5542.8
- 散金: 5
- 红花: 3
- 帖子: 540
- 在线: 854.2小时
- 虫号: 556087
- 注册: 2008-05-10
- 性别: GG
- 专业: 有机合成
★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★
追忆似水流年(金币+15,VIP+0):按照翻译先后顺序给金币
追忆似水流年(金币+15,VIP+0):按照翻译先后顺序给金币
沙发...!! In this paper, we added the modified SiO2 particles and prepared methyl silicone resin microspheres into the coatings. The morphology of the coatings was studied by SEM, while the hydrophobic variation was measured by a contact angle instrument. The influence of hydrophobe in different coating base materials on hydrophobicity was also investigated. The results showed that the hydrophobicity of the coatings was elevated by the improved roughness after the adding of the modified SiO2 and prepared methyl silicone resin microspheres into the coatings.and because of increased the roughness of the coat surface, enhanced the hydrophobic of coat. As the base material is the silicone-acrylic latex, the contact angle between the coat and the water are 114.87˚ and 106.12˚; As the base material is styrene-acrylic emulsion, the contact angle between the coat and the water are 110.92 ˚ and 106.18 ˚; As the base material is Hydrogen silicone oil, the contact angle between the coat and the water are 124.28 ˚ and 130.39 ˚. The hydrophobic added hydrophobe mixture in the coat is stronger than in single hydrophobe, the contact angle of water is 117.02˚ in the coat of silicone-acrylic, and 115.53˚ in the coat of styrene-acrylic, when in the oil of hydrogen Silicon coat, the circles structure conjunct in micron and millimicron are formed, obviously improved the hydrophobe, the contact angle of water is 137.6˚. |
5楼2008-05-28 18:13:28
40