版主 (职业作家)
为幸福搬砖 ![]()
|
【答案】应助回帖
楼主你好，你要找的应该是这款吧：Carbopol AQUA SF-1 polymer （路博润）
下面是看图时间。
1. Formula was initially made without adding any neutralizer: pH = 6.0
2. pH adjusted with Sodium hydroxide to 7.0, viscosity decreases.
3. pH adjusted with citric acid to 4.0. Note increase in viscosity as pH decreases
Notice that this effect is not observed in the formula without Carbopol AQUA SF-1 polymer.
If high pH’s are required, “Back-Acid” thickening is still an option: Add additional polymer, or try increasing pH higher, and then reducing to desired pH.
*Brookfield RVT (Measured immediately) Note : these are all initial values, viscosity increases and stabilizes in 24 hours.
![有一款液体卡波姆SF-1的提到回酸增稠技术，有知道确切的吗，谢谢]()
卡波回酸增稠.png
|
|
回复此楼
