| 查看: 801 | 回复: 3 | ||
| 当前只显示满足指定条件的回帖，点击这里查看本话题的所有回帖 | ||
[求助]
焊接命令流 多层 可用 求教一些问题
|
||
|
下面是焊接的一段命令流，有些不懂的地方，请各位大神指导一下:cry::cry::cry::cry:问题:cry::cry::cry::cry:该命令可用。另附件命令流一份 /PREP7 ET, 1, PLANE77 ET, 2, SOLID90 V=0.005 LENGTH=0.05 L_NUMBER=LENGTH/V MPTEMP, 1, 0, 300, 600, 1000, 1300, 2000 MPDATA, DENS, 1, 1, 7859, 7770, 7659, 7600, 6750, 6750 MPDATA, DENS, 2, 1, 7859, 7770, 7659, 7600, 6750, 6750 MPDATA, C, 1, 1, 450, 514, 967, 1370, 2800, 2000 MPDATA, C, 2, 1, 450, 514, 967, 1370, 2800, 2000 MPDATA, KXX, 1, 1, 67, 53, 39, 31, 20, 20 MPDATA, KXX, 2, 1, 67, 53, 39, 31, 20, 20 RECT, 0, 0.10, 0, 0.01 K, 5, 0.002 K, 6, 0.002, 0.002 K, 7, 0.00662, 0.01 K, 8, 0.00339, 0.01112 K, 9, 0, 0.0115 LARC, 7, 9, 8 A, 1, 5, 6, 7, 9 AGEN, 2, 2 ASBA, 1, 2 AGLUE, ALL K, 20, 0, -0.00385 CIRCLE, 20, 0.008,,,90 CIRCLE, 20, 0.012,,,90 ASBL, 3, 4 ASBL, 2, 5 ESIZE, 0.00075 SMRTSIZE, 7 MSHAPE, 1 AMESH, 3, 5, 1 ESIZE, 0.003 AMESH, 1 EXTOPT, ESIZE, L_NUMBER EXTOPT, ACLEAR, 1 MAT, 1 VEXT, 3, 5, 1,,,LENGTH MAT, 2 VEXT, 1,,,,,LENGTH NUMMRG, NODE ALLS FINISH /SOLU AUTOTS, ON OUTPR, NSOL, ALL OUTRES, NSOL, ALL KBC, 1 ANTYPE, TRANS TIMINT, OFF NSUBST, 4 D, ALL, TEMP, 20 TIME, 0.01 SOLVE ESEL, S, MAT,,1 EKILL, ALL :cry::cry::cry: 焊缝区杀死之后，又进行的”ESEL，ALL“选取的是哪？:cry::cry::cry: ESEL, ALL TIME, 0.02 SOLVE TIMINT, ON, THER DDELE, ALL, TEMP TIME=0.02 *DIM, QQ, ARRAY, 8 :cry::cry::cry: 8是怎么来的？？:cry::cry::cry: *DIM, E_NODE, ARRAY, 20 *GET, ELEM_MAX, ELEM, 0, NUM, MAX :cry::cry::cry: 所有的GET命令是针对的焊缝区吗？？:cry::cry::cry: *GET, ELEM_MIN, ELEM, 0, NUM, MIN *GET, NODE_MAX, NODE, 0, NUM, MAX *GET, NODE_MIN, NODE, 0, NUM, MIN *DIM, NODE_AVE, ARRAY, NODE_MAX *DO, J, NODE_MIN, NODE_MAX ALLS *IF, NSEL(J), EQ, 1, THEN NSEL, S,,,J ESLN, S *GET, NODE_AVE(J), ELEM, 0, COUNT *ENDIF *ENDDO ALLS *DO, KK, 1, 3 R=0.02 *IF, KK, EQ, 1, THEN Q=3200*0.7 QMAX=3*Q/3.1415926/R/R XC= 0.11190E-02 YC= 0.21451E-02 V_NUM=2 TIME_INC=LENGTH/L_NUMBER/V *ENDIF *IF, KK, EQ, 2, THEN Q=4500*0.7 QMAX=3*Q/3.1415926/R/R XC= 0.20373E-02 YC= 0.60454E-02 V_NUM=1 TIME_INC=LENGTH/L_NUMBER/1.5/V *ENDIF *IF, KK, EQ, 3, THEN Q=5800*0.7 QMAX=3*Q/3.1415926/R/R XC= 0.29574E-02 YC= 0.94733E-02 V_NUM=3 TIME_INC=LENGTH/L_NUMBER/2/V *ENDIF *DO, J, 1, L_NUMBER SFEDELE, ALL, ALL, HFLUX VSEL, S,,,V_NUM ESLV, S, 1 NSEL, R, LOC, Z, (J-1)*LENGTH/L_NUMBER+0.001, J*LENGTH/L_NUMBER-0.001 ESLN, R EALIVE, ALL ALLS ZC=(J-0.5)*LENGTH/L_NUMBER *DO, I, ELEM_MIN, ELEM_MAX *IF, ESEL(I), EQ, 1, THEN ESEL, S,,,I *DO, K, 1, 8 *GET, E_NODE(K), ELEM, I, NODE, K ! SS=E_NODE(K) DISP=SQRT((NX(SS)-XC)*(NX(SS)-XC)+(NY(SS)-YC)*(NY(SS)-YC)+(NZ(SS)-ZC)*(NZ(SS)-ZC)) EEE=3*DISP*DISP/R/R *IF, EEE, LT, 25, THEN QQ(K)=QMAX*EXP(-EEE)/NODE_AVE(E_NODE(K)) *ELSE QQ(K)=0 *ENDIF *ENDDO *IF, QQ(1)+QQ(2)+QQ(3)+QQ(4), NE, 0, THEN :cry::cry::cry::cry:从这开始*IF, QQ是什么意思:cry::cry::cry: SFE, I, 1, HFLUX,,QQ(1), QQ(2), QQ(3), QQ(4) *ENDIF *IF, QQ(1)+QQ(2)+QQ(5)+QQ(6), NE, 0, THEN SFE, I, 2, HFLUX,,QQ(1), QQ(2), QQ(6), QQ(5) *ENDIF *IF, QQ(6)+QQ(2)+QQ(3)+QQ(7), NE, 0, THEN SFE, I, 3, HFLUX,,QQ(2), QQ(3), QQ(7), QQ(6) *ENDIF *IF, QQ(1)+QQ(4)+QQ(5)+QQ(7), NE, 0, THEN SFE, I, 5, HFLUX,,QQ(1), QQ(4), QQ(7), QQ(5) *ENDIF *IF, QQ(5)+QQ(6)+QQ(7)+QQ(8), NE, 0, THEN SFE, I, 6, HFLUX,,QQ(5), QQ(6), QQ(7), QQ(8) *ENDIF ALLS *ENDIF *ENDDO ALLS ASEL, S, LOC, Z, 0 ASEL, A, LOC, Z, LENGTH ASEL, A,,,20, 22, 1 ASEL, A,,,17 SFA, ALL, 1, CONV, 30, 20 ALLS TIME=TIME+TIME_INC NSUBST, 5, 10, 3 LNSRCH, ON TIME, TIME SOLVE *ENDDO TIME=TIME+3600 TIME, TIME SFEDELE, ALL, ALL, HFLUX SOLVE *ENDDO SAVE FINI |
回复此楼» 猜你喜欢
欢迎发来filecode的Mz6后的代码验证其规律
已经有49人回复
-
咱们一起用铁证分析2026国家社科基金中标与否
已经有21人回复
-
哪位老哥知道今年的国自然具体哪一天放榜？
已经有5人回复
-
国基金的申报应该改成非等额制，评价高的钱多评价低的钱少，但是增加资助率
已经有8人回复
-
各位道友，我要去昆明玩几天，回来见。
已经有7人回复
-
filecode
已经有10人回复
-
奇怪，两个人的filecode固定段从头到尾一模一样
已经有11人回复
-
有时候，自然基金真的不能太认真 （我的申报经验）
已经有8人回复
-
应该是93bebmhtak前后十一个字符比较关键
已经有37人回复
-
好奇怪的filecode
已经有7人回复
» 本主题相关价值贴推荐，对您同样有帮助:
- ANSYS模拟焊接生死单元方法，求命令的错误鉴别
已经有7人回复
3楼2014-04-28 15:18:12
2楼2014-04-27 20:47:34
