应《网络安全法》要求，自2017年10月1日起，未进行实名认证将不得使用互联网跟帖服务。为保障您的帐号能够正常使用，请尽快对帐号进行手机号验证，感谢您的理解与支持！

24小时热门版块排行榜    

小木虫论坛-学术科研互动平台 » 计算模拟区 » 第一性原理 » Vasp&MedeA » 求问vasp5.2.12在redhat上的编译
北京石油化工学院2026年研究生招生接收调剂公告
61/1返回列表
查看: 1509  |  回复: 5
只看楼主 @他人 存档 新回复提醒 (忽略) 收藏    在APP中查看

jiewei

专家顾问 (著名写手)

小才

[求助] 求问vasp5.2.12在redhat上的编译 已有1人参与

gcc，fftw  interl编译器和数学库都装好了， mpi也装了。
现在在vasp5.2.12下进行并行编译的时候出现如下错误：
请问该如何解决？

ifort: command line remark #10010: option '-lowercase' is deprecated and will be removed in a future release. See '-help deprecated'
fftmpiw.f90(462): error #6460: This is not a field name that is defined in the encompassing structure.   [NODE_ME]
               IF (GRID%COMM%NODE_ME==1) THEN
-----------------------------^
compilation aborted for fftmpiw.f90 (code 1)
make: *** [fftmpiw.o] Error 1
回复此楼

» 猜你喜欢

» 本主题相关价值贴推荐，对您同样有帮助:
我想做个科学家，可我又喜欢写诗；我想做一个诗人，可我却读的理工科..
1楼 2014-04-17 00:04:56
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

jiewei

专家顾问 (著名写手)

小才
我的makefile文件：
.SUFFIXES: .inc .f .f90 .F
#-----------------------------------------------------------------------
# Makefile for Intel Fortran compiler for Pentium/Athlon/Opteron
# bases systems
# we recommend this makefile for both Intel as well as AMD systems
# for AMD based systems appropriate BLAS and fftw libraries are
# however mandatory (whereas they are optional for Intel platforms)
#
# The makefile was tested only under Linux on Intel and AMD platforms
# the following compiler versions have been tested:
#  - ifc.7.1  works stable somewhat slow but reliably
#  - ifc.8.1  fails to compile the code properly
#  - ifc.9.1  recommended (both for 32 and 64 bit)
#  - ifc.10.1 partially recommended (both for 32 and 64 bit)
#             tested build 20080312 Package ID: l_fc_p_10.1.015
#             the gamma only mpi version can not be compiles
#             using ifc.10.1
#
# it might be required to change some of library pathes, since
# LINUX installation vary a lot
# Hence check ***ALL*** options in this makefile very carefully
#-----------------------------------------------------------------------
#
# BLAS must be installed on the machine
# there are several options:
# 1) very slow but works:
#   retrieve the lapackage from ftp.netlib.org
#   and compile the blas routines (BLAS/SRC directory)
#   please use g77 or f77 for the compilation. When I tried to
#   use pgf77 or pgf90 for BLAS, VASP hang up when calling
#   ZHEEV  (however this was with lapack 1.1 now I use lapack 2.0)
# 2) more desirable: get an optimized BLAS
#
# the two most reliable packages around are presently:
# 2a) Intels own optimised BLAS (PIII, P4, PD, PC2, Itanium)
#     http://developer.intel.com/software/products/mkl/
#   this is really excellent, if you use Intel CPU's
#
# 2b) probably fastest SSE2 (4 GFlops on P4, 2.53 GHz, 16 GFlops PD,
#     around 30 GFlops on Quad core)
#   Kazushige Goto's BLAS
#   http://www.cs.utexas.edu/users/kgoto/signup_first.html
#   http://www.tacc.utexas.edu/resources/software/
#
#-----------------------------------------------------------------------

# all CPP processed fortran files have the extension .f90
SUFFIX=.f90

#-----------------------------------------------------------------------
# fortran compiler and linker
#-----------------------------------------------------------------------
FC=/opt/intel/composer_xe_2011_sp1.6.233/bin/intel64/ifort
# fortran linker
FCL=$(FC)


#-----------------------------------------------------------------------
# whereis CPP ?? (I need CPP, can't use gcc with proper options)
# that's the location of gcc for SUSE 5.3
#
#  CPP_   =  /usr/lib/gcc-lib/i486-linux/2.7.2/cpp -P -C
#
# that's probably the right line for some Red Hat distribution:
#
#  CPP_   =  /usr/lib/gcc-lib/i386-redhat-linux/2.7.2.3/cpp -P -C
#
#  SUSE X.X, maybe some Red Hat distributions:

CPP_ =  ./preprocess <$*.F | /usr/bin/cpp -P -C -traditional >$*$(SUFFIX)

#-----------------------------------------------------------------------
# possible options for CPP:
# NGXhalf             charge density   reduced in X direction
# wNGXhalf            gamma point only reduced in X direction
# avoidalloc          avoid ALLOCATE if possible
# PGF90               work around some for some PGF90 / IFC bugs
# CACHE_SIZE          1000 for PII,PIII, 5000 for Athlon, 8000-12000 P4, PD
# RPROMU_DGEMV        use DGEMV instead of DGEMM in RPRO (depends on used BLAS)
# RACCMU_DGEMV        use DGEMV instead of DGEMM in RACC (depends on used BLAS)
# tbdyn                 MD package of Tomas  Bucko
#-----------------------------------------------------------------------

CPP     = $(CPP_)  -DHOST=\"LinuxIFC\" \
          -DCACHE_SIZE=12000 -DPGF90 -Davoidalloc -DNGXhalf \
#          -DRPROMU_DGEMV  -DRACCMU_DGEMV

#-----------------------------------------------------------------------
# general fortran flags  (there must a trailing blank on this line)
# byterecl is strictly required for ifc, since otherwise
# the WAVECAR file becomes huge
#-----------------------------------------------------------------------

FFLAGS =  -FR -lowercase -assume byterecl

#-----------------------------------------------------------------------
# optimization
# we have tested whether higher optimisation improves performance
# -axK  SSE1 optimization,  but also generate code executable on all mach.
#       xK improves performance somewhat on XP, and a is required in order
#       to run the code on older Athlons as well
# -xW   SSE2 optimization
# -axW  SSE2 optimization,  but also generate code executable on all mach.
# -tpp6 P3 optimization
# -tpp7 P4 optimization
#-----------------------------------------------------------------------

# ifc.9.1, ifc.10.1 recommended
OFLAG=-O2 -ip -ftz

OFLAG_HIGH = $(OFLAG)
OBJ_HIGH =
OBJ_NOOPT =
DEBUG  = -FR -O0
INLINE = $(OFLAG)

#-----------------------------------------------------------------------
# the following lines specify the position of BLAS  and LAPACK
# VASP works fastest with the libgoto library
# so that's what we recommend
#-----------------------------------------------------------------------

# mkl.10.0
# set -DRPROMU_DGEMV  -DRACCMU_DGEMV in the CPP lines
#BLAS=-L/opt/intel/composer_xe_2011_sp1.6.233/mkl/10.2.5.035/lib/em64t -lmkl -lpthread

# even faster for VASP Kazushige Goto's BLAS
# http://www.cs.utexas.edu/users/kgoto/signup_first.html
# parallel goto version requires sometimes -libverbs
BLAS=  -L/opt/intel/composer_xe_2011_sp1.6.233/mkl/10.2.5.035/lib/em64t -lmkl_intel_lp64 -lmkl_sequential -lmkl_core -lpthread

# LAPACK, simplest use vasp.5.lib/lapack_double
LAPACK= ../vasp.5.lib/lapack_double.o

# use the mkl Intel lapack
#LAPACK= -lmkl_lapack

#-----------------------------------------------------------------------

LIB  = -L../vasp.5.lib -ldmy \
     ../vasp.5.lib/linpack_double.o $(LAPACK) \
     $(BLAS)

# options for linking, nothing is required (usually)
LINK    =

#-----------------------------------------------------------------------
# fft libraries:
# VASP.5.2 can use fftw.3.1.X (http://www.fftw.org)
# since this version is faster on P4 machines, we recommend to use it
#-----------------------------------------------------------------------

FFT3D   = fft3dfurth.o fft3dlib.o

# alternatively: fftw.3.1.X is slighly faster and should be used if available
#FFT3D   = fftw3d.o fft3dlib.o   /opt/libs/fftw-3.1.2/lib/libfftw3.a


#=======================================================================
# MPI section, uncomment the following lines until
#    general  rules and compile lines
# presently we recommend OPENMPI, since it seems to offer better
# performance than lam or mpich
#
# !!! Please do not send me any queries on how to install MPI, I will
# certainly not answer them !!!!
#=======================================================================
#-----------------------------------------------------------------------
# fortran linker for mpi
#-----------------------------------------------------------------------

#FC=/usr/local/bin/mpif90
#FCL=$(FC)

#-----------------------------------------------------------------------
# additional options for CPP in parallel version (see also above):
# NGZhalf               charge density   reduced in Z direction
# wNGZhalf              gamma point only reduced in Z direction
# scaLAPACK             use scaLAPACK (usually slower on 100 Mbit Net)
# avoidalloc          avoid ALLOCATE if possible
# PGF90               work around some for some PGF90 / IFC bugs
# CACHE_SIZE          1000 for PII,PIII, 5000 for Athlon, 8000-12000 P4, PD
# RPROMU_DGEMV        use DGEMV instead of DGEMM in RPRO (depends on used BLAS)
# RACCMU_DGEMV        use DGEMV instead of DGEMM in RACC (depends on used BLAS)
# tbdyn                 MD package of Tomas  Bucko
#-----------------------------------------------------------------------

#-----------------------------------------------------------------------

#CPP    = $(CPP_) -DMPI  -DHOST=\"LinuxIFC\" -DIFC \
       -DCACHE_SIZE=4000 -DPGF90 -Davoidalloc -DNGZhalf \
#     -DMPI_BLOCK=8000
##    -DRPROMU_DGEMV  -DRACCMU_DGEMV

#-----------------------------------------------------------------------
# location of SCALAPACK
# if you do not use SCALAPACK simply leave that section commented out
#-----------------------------------------------------------------------

#BLACS=$(HOME)/archives/SCALAPACK/BLACS/
#SCA_=$(HOME)/archives/SCALAPACK/SCALAPACK

#SCA= $(SCA_)/libscalapack.a  \
  $(BLACS)/LIB/blacsF77init_MPI-LINUX-0.a $(BLACS)/LIB/blacs_MPI-LINUX-0.a $(BLACS)/LIB/blacsF77init_MPI-LINUX-0.a

SCA=

#-----------------------------------------------------------------------
# libraries for mpi
#-----------------------------------------------------------------------

LIB     = -L../vasp.5.lib -ldmy  \
      ../vasp.5.lib/linpack_double.o $(LAPACK) \
      $(SCA) $(BLAS)

# FFT: fftmpi.o with fft3dlib of Juergen Furthmueller
#FFT3D   = fftmpi.o fftmpi_map.o fft3dfurth.o fft3dlib.o

# alternatively: fftw.3.1.X is slighly faster and should be used if available
FFT3D   = fftmpiw.o fftmpi_map.o fftw3d.o fft3dlib.o  /home/CMSOD/fftw/lib/libfftw3.a

#-----------------------------------------------------------------------
# general rules and compile lines
#-----------------------------------------------------------------------
BASIC=   symmetry.o symlib.o   lattlib.o  random.o   


SOURCE=  base.o     mpi.o      smart_allocate.o      xml.o  \
         constant.o jacobi.o   main_mpi.o  scala.o   \
         asa.o      lattice.o  poscar.o   ini.o  mgrid.o  xclib.o  vdw_nl.o  xclib_grad.o \
         radial.o   pseudo.o   gridq.o     ebs.o  \
         mkpoints.o wave.o     wave_mpi.o  wave_high.o  \
         $(BASIC)   nonl.o     nonlr.o    nonl_high.o dfast.o    choleski2.o \
         mix.o      hamil.o    xcgrad.o   xcspin.o    potex1.o   potex2.o  \
         constrmag.o cl_shift.o relativistic.o LDApU.o \
         paw_base.o metagga.o  egrad.o    pawsym.o   pawfock.o  pawlhf.o   rhfatm.o  paw.o   \
         mkpoints_full.o       charge.o   Lebedev-Laikov.o  stockholder.o dipol.o    pot.o \
         dos.o      elf.o      tet.o      tetweight.o hamil_rot.o \
         steep.o    chain.o    dyna.o     sphpro.o    us.o  core_rel.o \
         aedens.o   wavpre.o   wavpre_noio.o broyden.o \
         dynbr.o    rmm-diis.o reader.o   writer.o   tutor.o xml_writer.o \
         brent.o    stufak.o   fileio.o   opergrid.o stepver.o  \
         chgloc.o   fast_aug.o fock.o     mkpoints_change.o sym_grad.o \
         mymath.o   internals.o dynconstr.o dimer_heyden.o dvvtrajectory.o vdwforcefield.o \
         hamil_high.o nmr.o    pead.o     mlwf.o     subrot.o   subrot_scf.o \
         force.o    pwlhf.o  gw_model.o optreal.o   davidson.o  david_inner.o \
         electron.o rot.o  electron_all.o shm.o    pardens.o  paircorrection.o \
         optics.o   constr_cell_relax.o   stm.o    finite_diff.o elpol.o    \
         hamil_lr.o rmm-diis_lr.o  subrot_cluster.o subrot_lr.o \
         lr_helper.o hamil_lrf.o   elinear_response.o ilinear_response.o \
         linear_optics.o linear_response.o   \
         setlocalpp.o  wannier.o electron_OEP.o electron_lhf.o twoelectron4o.o \
         ratpol.o screened_2e.o wave_cacher.o chi_base.o wpot.o local_field.o \
         ump2.o bse_te.o bse.o acfdt.o chi.o sydmat.o dmft.o \
         rmm-diis_mlr.o  linear_response_NMR.o

vasp: $(SOURCE) $(FFT3D) $(INC) main.o
        rm -f vasp
        $(FCL) -o vasp main.o  $(SOURCE)   $(FFT3D) $(LIB) $(LINK)
makeparam: $(SOURCE) $(FFT3D) makeparam.o main.F $(INC)
        $(FCL) -o makeparam  $(LINK) makeparam.o $(SOURCE) $(FFT3D) $(LIB)
zgemmtest: zgemmtest.o base.o random.o $(INC)
        $(FCL) -o zgemmtest $(LINK) zgemmtest.o random.o base.o $(LIB)
dgemmtest: dgemmtest.o base.o random.o $(INC)
        $(FCL) -o dgemmtest $(LINK) dgemmtest.o random.o base.o $(LIB)
ffttest: base.o smart_allocate.o mpi.o mgrid.o random.o ffttest.o $(FFT3D) $(INC)
        $(FCL) -o ffttest $(LINK) ffttest.o mpi.o mgrid.o random.o smart_allocate.o base.o $(FFT3D) $(LIB)
kpoints: $(SOURCE) $(FFT3D) makekpoints.o main.F $(INC)
        $(FCL) -o kpoints $(LINK) makekpoints.o $(SOURCE) $(FFT3D) $(LIB)

clean:       
        -rm -f *.g *.f *.o *.L *.mod ; touch *.F

main.o: main$(SUFFIX)
        $(FC) $(FFLAGS)$(DEBUG)  $(INCS) -c main$(SUFFIX)
xcgrad.o: xcgrad$(SUFFIX)
        $(FC) $(FFLAGS) $(INLINE)  $(INCS) -c xcgrad$(SUFFIX)
xcspin.o: xcspin$(SUFFIX)
        $(FC) $(FFLAGS) $(INLINE)  $(INCS) -c xcspin$(SUFFIX)

makeparam.o: makeparam$(SUFFIX)
        $(FC) $(FFLAGS)$(DEBUG)  $(INCS) -c makeparam$(SUFFIX)

makeparam$(SUFFIX): makeparam.F main.F
#
# MIND: I do not have a full dependency list for the include
# and MODULES: here are only the minimal basic dependencies
# if one strucuture is changed then touch_dep must be called
# with the corresponding name of the structure
#
base.o: base.inc base.F
mgrid.o: mgrid.inc mgrid.F
constant.o: constant.inc constant.F
lattice.o: lattice.inc lattice.F
setex.o: setexm.inc setex.F
pseudo.o: pseudo.inc pseudo.F
poscar.o: poscar.inc poscar.F
mkpoints.o: mkpoints.inc mkpoints.F
wave.o: wave.F
nonl.o: nonl.inc nonl.F
nonlr.o: nonlr.inc nonlr.F

$(OBJ_HIGH):
        $(CPP)
        $(FC) $(FFLAGS) $(OFLAG_HIGH) $(INCS) -c $*$(SUFFIX)
$(OBJ_NOOPT):
        $(CPP)
        $(FC) $(FFLAGS) $(INCS) -c $*$(SUFFIX)

fft3dlib_f77.o: fft3dlib_f77.F
        $(CPP)
        $(F77) $(FFLAGS_F77) -c $*$(SUFFIX)

.F.o:
        $(CPP)
        $(FC) $(FFLAGS) $(OFLAG) $(INCS) -c $*$(SUFFIX)
.F$(SUFFIX):
        $(CPP)
$(SUFFIX).o:
        $(FC) $(FFLAGS) $(OFLAG) $(INCS) -c $*$(SUFFIX)

# special rules
#-----------------------------------------------------------------------
# these special rules are cummulative (that is once failed
#   in one compiler version, stays in the list forever)
# -tpp5|6|7 P, PII-PIII, PIV
# -xW use SIMD (does not pay of on PII, since fft3d uses double prec)
# all other options do no affect the code performance since -O1 is used

fft3dlib.o : fft3dlib.F
        $(CPP)
        $(FC) -FR -lowercase -O2 -c $*$(SUFFIX)

fft3dfurth.o : fft3dfurth.F
        $(CPP)
        $(FC) -FR -lowercase -O1 -c $*$(SUFFIX)

fftw3d.o : fftw3d.F
        $(CPP)
        $(FC) -FR -lowercase -O1 -c $*$(SUFFIX)

wave_high.o : wave_high.F
        $(CPP)
        $(FC) -FR -lowercase -O1 -c $*$(SUFFIX)

radial.o : radial.F
        $(CPP)
        $(FC) -FR -lowercase -O1 -c $*$(SUFFIX)

symlib.o : symlib.F
        $(CPP)
        $(FC) -FR -lowercase -O1 -c $*$(SUFFIX)

symmetry.o : symmetry.F
        $(CPP)
        $(FC) -FR -lowercase -O1 -c $*$(SUFFIX)

wave_mpi.o : wave_mpi.F
        $(CPP)
        $(FC) -FR -lowercase -O1 -c $*$(SUFFIX)

wave.o : wave.F
        $(CPP)
        $(FC) -FR -lowercase -O1 -c $*$(SUFFIX)

dynbr.o : dynbr.F
        $(CPP)
        $(FC) -FR -lowercase -O1 -c $*$(SUFFIX)

asa.o : asa.F
        $(CPP)
        $(FC) -FR -lowercase -O1 -c $*$(SUFFIX)

broyden.o : broyden.F
        $(CPP)
        $(FC) -FR -lowercase -O2 -c $*$(SUFFIX)

us.o : us.F
        $(CPP)
        $(FC) -FR -lowercase -O1 -c $*$(SUFFIX)

LDApU.o : LDApU.F
        $(CPP)
        $(FC) -FR -lowercase -O2 -c $*$(SUFFIX)
赞一下 回复此楼
我想做个科学家，可我又喜欢写诗；我想做一个诗人，可我却读的理工科..
2楼2014-04-17 00:05:27
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

mywai520

铁杆木虫 (著名写手)

【答案】应助回帖

感谢参与，应助指数 +1
-lowercase去掉，这个在5.2中，intel高版本中已经不需要。
赞一下 回复此楼
3楼2014-04-17 00:28:04
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

jiewei

专家顾问 (著名写手)

小才
引用回帖:
3楼: Originally posted by mywai520 at 2014-04-17 00:28:04
-lowercase去掉，这个在5.2中，intel高版本中已经不需要。

去掉了，还是一样的错误
赞一下 回复此楼
我想做个科学家，可我又喜欢写诗；我想做一个诗人，可我却读的理工科..
4楼2014-04-17 00:48:35
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

jiewei

专家顾问 (著名写手)

小才
#FC=/usr/local/bin/mpif90
#FCL=$(FC)
这两行也换成了
FC=/home/CMSOD/mpich2/bin/mpif90（重新装了以i啊mpi）
FCL=$(FC)
赞一下 回复此楼
我想做个科学家，可我又喜欢写诗；我想做一个诗人，可我却读的理工科..
5楼2014-04-17 00:49:50
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

mywai520

铁杆木虫 (著名写手)

【答案】应助回帖

★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★
jiewei: 金币+50, ★★★★★最佳答案, 谢谢帮助。每次你都耐心的回我贴。感谢 2014-04-18 21:50:40
你可能设置上有问题，你可以看看我发的一个帖子，是关于5.3.3编译的makefile,希望对你有帮助。http://muchong.com/bbs/viewthread.php?tid=7255487
赞一下 回复此楼
6楼2014-04-17 01:03:11
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖
相关版块跳转 我要订阅楼主 jiewei 的主题更新
61/1返回列表
普通表情 龙 兔 虎 猫
最具人气热帖推荐 [查看全部] 作者 回/看 最后发表
[考研] 材料学硕333求调剂 +14 北道巷 2026-03-24 14/700 2026-03-30 18:59 by 源_2020
[考研] 环境科学与工程334分求调剂 +6 王一一依依 2026-03-30 8/400 2026-03-30 11:52 by yjolah
[考研] 生物技术与工程 +7 1294608413 2026-03-25 8/400 2026-03-30 11:36 by 唐沐儿
[考研] 南京大学化学调剂 +10 景随风 2026-03-29 15/750 2026-03-30 11:21 by limeifeng
[考研] 化学工程085602 305分求调剂 +25 RichLi_ 2026-03-25 25/1250 2026-03-30 11:02 by klasasda
[考研] 282求调剂 +4 wcq131415 2026-03-24 4/200 2026-03-30 10:39 by Delta2012
[考研] 085600，材料与化工321分求调剂 +10 大馋小子 2026-03-28 10/500 2026-03-29 23:35 by 飞行日记西
[考研] 一志愿武汉理工，总分321，英一数二，求老师收留。 +11 nnnnnnn5 2026-03-25 11/550 2026-03-29 20:42 by 无际的草原
[考研] 一志愿双一流机械285分求调剂 +4 幸运的三木 2026-03-29 5/250 2026-03-29 14:49 by Miko19
[考研] 349求调剂 +6 李木子啊哈哈 2026-03-25 6/300 2026-03-29 12:47 by 无际的草原
[考研] 298求调剂 +3 种圣赐 2026-03-29 3/150 2026-03-29 12:06 by longlotian
[考研] 0703化学调剂，求导师收 +9 天天好运来上岸� 2026-03-24 10/500 2026-03-28 22:17 by chemzp
[考研] 312，生物学求调剂 +3 小译同学abc 2026-03-28 3/150 2026-03-28 15:32 by 落睿可思
[考研] 322求调剂 +5 旧吢 2026-03-24 5/250 2026-03-28 13:26 by Iveryant
[考研] 299求调剂 +7 嗯嗯嗯嗯2 2026-03-27 7/350 2026-03-28 13:09 by 唐沐儿
[考研] 化学调剂 +4 爱吃番茄的旭 2026-03-24 5/250 2026-03-27 17:50 by kiokin
[考研] 复试调剂，一志愿南农083200食品科学与工程 +5 XQTJZ 2026-03-26 5/250 2026-03-27 14:49 by 狂炫麦当当
[考研] 0703化学338求调剂！ +6 Zuhui0306 2026-03-26 7/350 2026-03-27 10:35 by shangxh
[考研] 机械学硕310分，数一英一，一志愿211本科双非找调剂信息 +3 @357 2026-03-25 3/150 2026-03-26 16:34 by by.MENG
[考研] 340求调剂 +5 话梅糖111 2026-03-24 5/250 2026-03-25 06:53 by ilovexiaobin
信息提示
关闭
请填处理意见
关闭