24小时热门版块排行榜    

查看: 1662  |  回复: 3

绿野渊

新虫 (小有名气)

[求助] 自然对流中的Boussinesq假设能否用来进行瞬态计算?

大家好,如题,我想请教一下自然对流中的Boussinesq假设能否用来进行瞬态计算?一直以来我都是用它来进行自然对流的瞬态计算的,尤其是不知道流体的密度随温度变化规律的时候。可是今天突然发现Fluent的tutorial里有这样一句话(http://cdlab2.fluid.tuwien.ac.at ... html/ug/node572.htm),如下所示。

“When you model natural convection inside a closed domain, the solution will depend on the mass inside the domain. Since this mass will not be known unless the density is known, you must model the flow in one of the following ways:

Perform a transient calculation. In this approach, the initial density will be computed from the initial pressure and temperature, so the initial mass is known. As the solution progresses over time, this mass will be properly conserved. If the temperature differences in your domain are large, you must follow this approach.

Perform a steady-state calculation using the Boussinesq model(described in Section  13.2.5). In this approach, you will specify a constant density, so the mass is properly specified. This approach is valid only if the temperature differences in the domain are small; if not, you must use the transient approach.”

看过这段话后我意识到了这个问题——是不是Boussinesq假设只能用于稳态计算?接着我又翻阅了几本传热传质的书籍,发现每本书里对于这个假设的推导都是基于稳态的边界层方程,这进一步加深了我的担忧。。。可是任何一个地方都没有明确说明Boussinesq假设不能用于瞬态计算。所以我现在相当纠结。。。求大侠解救一下,多谢啦:-)
回复此楼
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

绿野渊

新虫 (小有名气)

我个人认为是可以的。因为Boussinesq假设中这个重要的近似式 (rho-rho0)*g=-rho0*beta*(T-T0)*g 在瞬态计算中也可以反映出密度的变化——密度随着温度会变,而温度随着时间和空间都会变化,正好体现出了瞬态计算的特点。
2楼2013-07-24 16:00:51
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

pippi6

铁杆木虫 (著名写手)

工程和科学数值计算咨询

【答案】应助回帖

★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★
感谢参与,应助指数 +1
csgt0: 金币+2, 多谢指导 2013-07-24 17:05:12
绿野渊: 金币+10, ★★★★★最佳答案, pippi6回答的很好哈! 2013-07-25 15:08:08
Boussinesq假设即不限于稳态,也不限于自然对流。

其实,在普通工程应用里,主要有两种情况。(1)空气的自然对流,这时,速度较低。动量产生的压力变化导致的密度变化(绝热)远小于温度变化引起的密度变化,或者是弱强制对流mach数大大小于1也是可以的。(2)不可压液体。这时,密度变化主要是由于温度变化,有限压力变化不太可能引起密度变化。

基本和是否稳态关系不大。当然,你不要有太剧烈的突然压缩之类(这基本也由速度不大保证了),导致冲击波的现象出现。
3楼2013-07-24 16:34:40
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

绿野渊

新虫 (小有名气)

引用回帖:
3楼: Originally posted by pippi6 at 2013-07-24 16:34:40
Boussinesq假设即不限于稳态,也不限于自然对流。

其实,在普通工程应用里,主要有两种情况。(1)空气的自然对流,这时,速度较低。动量产生的压力变化导致的密度变化(绝热)远小于温度变化引起的密度变化,或 ...

哇,又是pippi6来解答啊。确实,我目前做的这个项目是研究你说的第二种情况,“不可压液体”(原油),其密度变化是由于温度变化,速度不大,压力变化也很小。我一直以来的仿真都是用的Boussinesq假设,昨天挺担心一直以来都算错了呢。多谢啦!
4楼2013-07-25 15:03:17
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖
相关版块跳转 我要订阅楼主 绿野渊 的主题更新
信息提示
请填处理意见