| 查看: 322 | 回复: 0 | ||
lmb147铜虫 (正式写手)
|
[求助]
翻译
|
|
8.3.3.2 Number of Data Points. At least four data points shall be taken for each value of tf,i. For the case with a fixed-mount test apparatus, two of the four data points shall be taken during the time period preceding solar noon and the other two shall be taken in the period following solar noon, the specific periods being chosen so that the data points represent times symmetrical to solar noon. This requirement is made so that any transient effects that may be present will not bias the test results when they are used for design purposes. The requirement for obtaining data points equally divided between morning and afternoon is not mandatory when tesing with an altazimuth mount. All test data shall be reported in addition to the fitted curve (see Section 9) so that any difference in efficiency due solely to the operating temperature level of the collector can be discerned in the test report. The curve shall be established by data points that represent efficiency values determined by integrating the data over a time period equal to the time constant, or five minutes, whichever is larger, as determined in accordance with Section 8.3.2. The integrated value of incident solar energy will be divided into the integrated value of energy obtained from the collector to obtain the efficiency value for that test period as described in Section 8.5. 8.3.3.3 Steady-State Conditions. In order to obtain steady-state or sufficiently good quasi-steady-state conditions for the solar collection process, the heat transfer fluid should be circulated through the collector |
回复此楼» 猜你喜欢
希望面上有个好结果
已经有5人回复
-
sci论文二审求助
已经有4人回复
-
今年也是没消息就是没中么
已经有12人回复
-
咸菜
已经有6人回复
-
有谁可曾问过你过的还好吗？
已经有5人回复
-
函评
已经有7人回复
-
以CTAB等为模板水热合成的产物，如何除去模板？
已经有6人回复
-
申博
已经有3人回复
-
前几天时间戳更新了
已经有14人回复
-
买卖文章的刷屏了！
已经有3人回复