24小时热门版块排行榜    

查看: 1097  |  回复: 9
【奖励】 本帖被评价7次,作者hbcnwatson增加金币 6
当前主题已经存档。
当前只显示满足指定条件的回帖,点击这里查看本话题的所有回帖

hbcnwatson

铜虫 (初入文坛)


[资源] 最新化学工程,反应工程 Comsol相关参考文献

化学工程中文参考文献
链接
http://pickup.mofile.com/9089536239112369
目录

低碳烷烃制备硝基烷烃.pdf
双扩散对流与成矿元素富集的机制.pdf
可植入式葡萄糖传感器数学模型的研究.pdf
国外镁合金微弧氧化研究状况.pdf
多维函数图形的一种三维可视化方法.pdf
多通道石英微天平振动耦合分析.pdf
大型动力系统轴系低频振动及其主动控制的研究.pdf
孔径型超分辨近场结构光盘的掩膜热效应分析.pdf
木糖和木糖醇SMB色谱分离过程建模与优化.pdf
木糖醇母液色谱分离性能优化.pdf
梁位移的有限单元法.pdf
热轧钢板在加速冷却时的温度模型.pdf
电磁波照射时大鼠体内比吸收率值计算.pdf
电磁阀驱动装置.pdf
磁记录浮动仿真.pdf
磁记录浮动性能研究.pdf
科学研究与工程数值模拟的必备工具.pdf
计算机模拟优化的葡萄糖传感器阵列.pdf
食品中欧姆加热温度分布监测方法的研究.pdf

反应工程英文版参考文献
链接
http://pickup.mofile.com/7284961470938798 Residence Time in a 2D and a 3D Turbulent Reactor 2D、3D         反应器中紊流滞留时间
2D Multiphysics CFD Modeling of an ARP Carbothermic Reactor ARP         碳热反应器的2D多物理场计算流体力学模拟
Catalytic Reactions under Unsteady-State Conditions. Modelling COMSOL         模拟非稳态条件下的催化反应
Modélisation d'une décharge luminescente à la pression atmosphérique         
Dynamic Adsorption with FEMLAB, Modeling breakthrough curves of gaseous pollutants through activated carbon beds          FEMLAB动力吸附:气体污染物通过活性炭吸附床的穿透曲线模拟
Modeling NOx Adsorption on NaZSM-5 Film with FEMLAB         FEMLAB模拟NOx在NaZSM-5上的吸收
Modeling of an LTCC Mixer Combustor         LTCC搅拌器-燃烧室模型
Quantitative assessment of the difference in free standard energy of reaction (ΔΔGO) between two enantiomers of a chiral molecule and a chiral surface using a convection-diffusion model coupled to surface reactions        两个对映体反应自由能区别研究
Analysis and Modelling of a low NOx “Swirl Burner”        低NOx涡两喷燃器的分析和模拟
Boat Reactor for Low Pressure Chemical Vapor Deposition        低压化学气相沉积的船型反应器.
Combustion of Lean Methane in a Catalytic Flow Reversal Reactor         低浓度甲烷在催化流向变换反应器中的燃烧
Porous Reactor with Injection Needle         具注射针的多孔反应器
CHEMICAL REACTIONS THERMAL TRANSFERS AND GAS DIFFUSION IN AN ENERGETIC MATERIAL        化学反应热传递和在含能材料中的气体扩散
Polymerization in a Semibatch Reactor         反应炉里的聚合反应
Phenomena Of Transient Thermal Transfers Coupled With Chemical Reactions In An Energetic Material        含能材料中耦合化学反应的瞬态热传递现象
Kinetics of Pentaerythritol Production        季戊四醇生产的动力学
Kinetics of Pentaerythritol Production        季戊四醇生产的动力学异丁苯丙酸合成
FEMLAB SIMULATIONS USING A COMPREHENSIVE         气体流化床反应器综合模型的FEMLAB模拟
Fixed-Bed Reactor for Catalytic Hydrocarbon Oxidation         固定床反应器烃类氧化
Modelling of the Chemo–Rheological Behaviour of Thermosetting Polymer Nanocomposites        热固化聚合物纳米材料的化学和流变行为模拟
Modeling of a Preferential Oxidation Reactor in a LPG Hydrogen Generator for PEFC         用于聚合物电解质燃料电池的LPG氢发生器中优先氧化反应器的模拟
The influence of air humidity on the interaction between VOC and construction materials         空气湿度对VOC和建筑材料之间的相互关系的影响
Ozone Combustion         臭氧燃烧
Coupling of Catalytic Endothermic and Exothermic Reactions by CPR Modelling and FEM Simulation         通过CPR耦合催化吸热、放热反应的建模和FEM模拟
MOCVD Research Reactor Simulation         金属有机物化学汽相淀积反应器模拟
Laminar Static Mixer        静态层流搅拌器
Modeling of Heat and Mass Transport in a Nonlinear Catalytic Bed         非线性催化床反应器中的传热、传质模拟




化学工程英文版参考文献

链接
http://pickup.mofile.com/4586934468739780

Non-Isothermal Flow         非等温流
Non-Newtonian Flow         非牛顿流
Obstacle in flow         障碍流体运动
The Flow of a Thin Liquid Film Past a Cylinder        薄流体膜通过圆筒的流动
Mathematical Modeling of Nanomaterials        纳米材料的数学模型
The k-epsilon Turbulence Model Application Mode        紊乱流的应用模型
Modelling of continuous steel coating by self-induced ion plating(SIIP)        离子电镀法连续铸造模型
Simulation of Magnetic Injection Moulding        磁注射浇铸仿真
Intrinsic Defects Diffusion in FZ Silicon during Crystal Growth        硅晶生长时扩散
Phase Change         相变
Femlab/Matlab model for complex electric swing adsorption (ESA) system with in-vessel condensation        电摆动吸收系统FEMLAB模型
Analysis and Topology Optimization of Heat Sinks with a Phase-Change Material on COMSOL Multiphysics™ Platform        平台上对带有相变材料散热器的分析和拓朴优化
Temperature profiles of molten flowing polymers in a channel die        熔铸的流体聚合物在流道中温度曲线图
Computations on the coupled heat and mass transfer during fires in bulk materials, coal deposits and waste dumps         煤燃烧过程中的传热、传质计算
FEMLAB Simulation of Thermoplastics Injection-Molding         热塑性塑料注塑模型的仿真
Hydraulic Behaviour in an Activated Denitrifying Sludge Tank         活性脱氮淤泥槽水压研究
Numerical Simulation with Comsol Multiphysics  of Crystallization Kinetics of Semi-Crystalline Polymer during Cooling Application to Injection Moulding Process         注射浇铸过程中结晶动力学数字仿真
Numerical modeling of coupled heat and mass transport during frying and cooling of wood in contact with oil         油煎和冷却过程中的传质、传热现象的数学模型油煎和冷却过程中的传质、传热现象的数学模型
Simulation des Durchbruchsverhaltens in der Gas-phase         气相反应模拟
Rising Bubble Modeled with the Level Set Method         气液两相流
Two-Dimensional, Non-Isothermal, Two-Phase Flow inside the Gas Diffusion Layer Unit of the Polymer-Electrolyte-Membrane Fuel Cell         气体在燃料电池中扩散的非等温两相流
Comsol Modelling of the Gas Mixing Process in a Ripple Reducer for NPL’s Time Division Dilution System        气体在减压稀释系统中混合过程的模拟
Modeling heat and oxygen atom diffusion in nuclear fuel rods with         FEMLAB核燃料棒中热和氧原子的扩散模拟
Microchannel Cell         微流道模拟
Building and Solving a Plane Strain Model         应力计算算例
Solution of a Scalar Convection-Diffusion Equation Using FEMLAB         对流扩散方程的应用
Modelling massive forming processes with thermally coupled fluid dynamics         大模型形成过程中的热-流体动力学耦合
Two-Phase Flow         多孔介质中的两相流
Model Predictive Control of a complex rheological forming Process based on a Finite Element Model         基于有限元的复杂流变学过程模拟
Groundwater Flow and Solute Transport         地下流和溶质传递
TWO-DIMENSIONAL FEM MODELING OF SEISMIC WAVE PROPAGATION IN COAL SEAM         在煤流层中地震波的2D有限元模型
Fluid Flow Past an Aperture in a Microfluidic Channel         在微流体通道中多孔流
Design and Simulation of a Spout Fluid Bed Coating System         喷流流化床的设计和仿真
Approximate analytical model for two-phase solidification problem in a finned phase-change material storage         两相流凝固问题的近似分析
Surface Tension Driven Flow During Oxygen Top Blowing of Liquid Copper         氧气经过液体铜是的表面张力
Solidification of a Liquid Metal Droplet Impinging on a Cold Surface         金属液滴碰到冷表面时的凝固现象
Simulation of the Inverse Extrusion of Brass Rod by the Coupling of Fluid Mechanical, Thermal and Ale Modules         铜棒转动过程中流体-热耦合的仿真
Simulation eines neuartigen Luft-Sand-Wärmeübertragers für den Einsatz in Solarthermischen Turmkraftwerken       
Modellierung von Stoff- und Wärmetransport beim Bandgießen         
Modelisation of a hyperelastic polymer membrane deformation         超弹性聚合体隔膜变形模型
Modeling of rotating parts         水泵模型
Application of FEMLAB on Supercritical Hydrogen Components of the High Flux Isotope Reactor Cold Source        FEMLAB在高密度流超临界氢同位素反应堆冷源上应用
Experimentelle Untersuchung und Simulation der instationären Temperaturprofile in einem Schüttschichtadsorber       
Chargenwärmebehandlung von Stah         
A tool for studying the ecology of hydrosystems         水生态环境研究
A Comparison between Moving Mesh Implementations for Metal Deposition Simulations         金属沉积中移动网格比较

[ Last edited by hbcnwatson on 2007-10-8 at 13:03 ]
回复此楼

» 猜你喜欢

» 本主题相关商家推荐: (我也要在这里推广)

已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

shinbade

铁杆木虫 (小有名气)


★★★ 三星级,支持鼓励

上传的资源很有用处,谢谢。
3楼2007-10-09 00:38:55
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖
查看全部 10 个回答

darliu

荣誉版主 (职业作家)


★★★★★ 五星级,优秀推荐

鼓励新手!
2楼2007-10-08 14:28:20
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

hbcnwatson

铜虫 (初入文坛)


大家好好啊,多多鼓励我会找更多资料过来的
5楼2007-10-10 14:49:45
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

hbcnwatson

铜虫 (初入文坛)


谢谢大家啦

[ Last edited by hbcnwatson on 2007-12-11 at 12:37 ]
8楼2007-12-11 12:36:06
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖
简单回复
hexingyi6楼
2007-10-12 01:15   回复  
 
2007-10-12 07:15   回复  
 谢谢分享!
☆ 无星级 ★ 一星级 ★★★ 三星级 ★★★★★ 五星级
普通表情 高级回复 (可上传附件)
信息提示
请填处理意见