| 查看: 149 | 回复: 1 | ||
| 【奖励】 本帖被评价1次，作者学员2bQ2PZ增加金币 0.5 个 | ||
| 当前主题已经存档。 | ||
[资源]
Processing Mesocarbon Microbeads To High-Performance Materials
|
||
|
Processing Mesocarbon Microbeads To High-Performance Materials For Friction Applications By Christopher William Norfolk, Chemical And Biomolecular Engineering, Notre Dame * Publisher: Chemical And Biomolecular Engineering, Notre Dame * Number Of Pages: 116 * Publication Date: 2005 * Binding: pdf excerpt: Honeywell, a leading manufacturer of friction materials for aerospace applications, manufactures brakes by densifying a carbon fiber preform using chemical vapor deposition. This has two major drawbacks, namely, the high cost of the fiber preform, and the time required to densify it via CVD. To address these issues, a novel material, mesocarbon microbeads, are investigated. This relatively inexpensive and rapidly processed material has shown good friction characteristics, but unacceptable fracture toughness. Therefore, major goals are to understand the behavior of MCMB during processing, and to investigate the most effective approach to producing hightoughness materials. Dilatometry, thermogravimetric analysis, x-ray diffraction, scanning electron microscopy, pycnometry, indentation, and compact tension were used study sintering, graphitization, and in-situ reinforcement of MCMB-based materials. It is shown that low temperature sintering consists of two processes: neck formation via a non-densifying liquid-phase sintering mechanism < 800 K, and significant sample shrinkage due to changes of true density in the region 800 – 1200 K. This results in material densification without decreasing porosity. During high temperature treatment, shrinkage is again accompanied by increases in theoretical density, maintaining porosity. However, observation of pore microstructures indicate that high temperature sintering mechanisms are active, which could result in overall porosity elimination given sufficiently long sintering times. http://rapidshare.com/files/54642179/R20070909R.rar |
回复此楼» 猜你喜欢
欢迎发来filecode的Mz6后的代码验证其规律
已经有70人回复
-
有时候，自然基金真的不能太认真 （我的申报经验）
已经有12人回复
-
招聘 金属平磨液，抛光液研发工程师
已经有3人回复
-
时间戳又变了8-15
已经有23人回复
-
filecode=后面第一个是大写字母
已经有7人回复
-
filecode
已经有12人回复
-
小木虫上这么多卖论文的，真有人买论文么？感觉没必要啊
已经有13人回复
-
哪位老哥知道今年的国自然具体哪一天放榜？
已经有7人回复
-
关于Filecode分析方法
已经有13人回复
-
各位道友，我要去昆明玩几天，回来见。
已经有8人回复
2楼2007-11-16 03:18:32
