| 查看: 771 | 回复: 0 | ||
[求助]
蔗糖按EP检验亚硫酸盐检查问题
|
|
蔗糖按EP7.0检验，其中亚硫酸盐一项不太明白，特请教各位： 见粗体部分，添加多少试剂？如何判断反应终点？ 方法原文如下： Sulfites: maximum 10 ppm, calculated as SO2. Determine the sulfites content by a suitable enzymatic method based on the following reactions. Sulfite is oxidised by sulfite oxidase to sulfate and hydrogen peroxide which in turn is reduced by nicotinamide-adenine dinucleotide-peroxidase in the presence of reduced nicotinamide-adenine dinucleotide (NADH). The amount of NADH oxidised is proportional to the amount of sulfite. Test solution. Dissolve 4.0 g of the substance to be examined in freshly prepared distilled water R and dilute to 10.0 mL with the same solvent. Reference solution. Dissolve 4.0 g of the substance to be examined in freshly prepared distilled water R, add 0.5 mL of sulfite standard solution (80 ppm SO2) R and dilute to 10.0 mL with freshly prepared distilled water R. Blank solution. Freshly prepared distilled water R. Separately introduce 2.0 mL each of the test solution, the reference solution and the blank in 10 mm cuvettes and add the reagents as described in the instructions in the kit for sulfite determination. Measure the absorbance (2.2.25) at the absorption maximum at about 340 nm before and at the end of the reaction time and subtract the value obtained with the blank. The absorbance difference of the test solution is not greater than half the absorbance difference of the reference solution. |
回复此楼» 猜你喜欢
数据驱动智能故障诊断技术应用与实践
已经有0人回复
-
基于AI智能算法的装备结构可靠性分析与优化设计技术
已经有0人回复
-
药物学论文润色/翻译怎么收费?
已经有97人回复
-
求助求助
已经有0人回复
-
农业资源与环境、智慧农业专业本科生毕业论文课题选题求助
已经有1人回复
-
巴黎萨克雷大学与国家留学基金委合作博士研究生项目-脂质纳米药物/生物材料/多酚递送
已经有10人回复
-
人工智能赋能聚合物及复合材料模型应用与实践
已经有0人回复
-
各国和国际组织现行药典注射用水质量标准
已经有0人回复
-
求助用微谱数据库查询
已经有0人回复
-
计算化学与人工智能驱动的MOFs性能预测与筛选技术
已经有0人回复
-
研三实验求指导
已经有0人回复
» 本主题相关商家推荐: (我也要在这里推广)
