24小时热门版块排行榜    

查看: 1675  |  回复: 8
当前只显示满足指定条件的回帖,点击这里查看本话题的所有回帖

zz57666

金虫 (正式写手)

[求助] 如何用电化学工作站

请问如何用电化学工作站实现如下循环:0V 5s  1.2V 0.5s 0V 5s 1.2V 0.5s............  需要选择哪种模式,具体怎么设置。万分感谢!!!
回复此楼

» 猜你喜欢

» 本主题相关价值贴推荐,对您同样有帮助:

已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

嘀嘟Д小库洛

木虫 (小有名气)

纯洁的魔王

【答案】应助回帖

就是计时电流
似乎最大只能重复320步,你这样的频率的话,处理电极的时间会比较短哦

Chronoamperometry
In Chronoamperometry (CA), potential is stepped from Init E toward either High E or
Low E depending on the Init P/N. The potential will then step back. The following diagram
shows the potential waveform applied as the function of time. The current is recorded as the
function of time.
The following are the experimental parameters, their range and descriptions:
Parameters Range Description
Init E (V) -10 - +10 Initial potential
High E (V) -10 - +10 High limit of potential scan
Low E (V) -10 - +10 Low limit of potential scan
Init P/N Positive or Negative Initial step direction
Number of Steps 1 - 320 Number of potential steps
Pulse Width (sec) 1e-4 - 1000 Potential pulse width
Sample Interval (s) 1e-6 - 10 Sampling Interval
Quiet Time (sec) 0 - 100000 Quiescent time before potential step
Sensitivity (A/V) 1e-12 - 0.1 Sensitivity scale
Auxiliary Signal
Recording
Check or Uncheck Simultaneously external signal
recording when the sample interval is
greater than 0.005 s
默默地...
9楼2011-11-08 17:18:39
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖
查看全部 9 个回答

857688363

铁杆木虫 (著名写手)

【答案】应助回帖

可以用电化学工作站里面的恒电位阶跃,里面设置如上的各种参数就可以了,不知道是不是
2楼2011-11-06 17:18:55
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

857688363

铁杆木虫 (著名写手)

【答案】应助回帖

哦,如果是循环的话那就不知道了
3楼2011-11-06 17:27:30
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

chgyhit

铁杆木虫 (著名写手)

你用的什么工作站???
4楼2011-11-06 18:40:51
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖
信息提示
请填处理意见