24小时热门版块排行榜    

查看: 314  |  回复: 1

wgl2006

木虫 (正式写手)


[交流] 【求助】有谁知道dowex1与 dowex 2的区别?

有谁知道dowex1与 dowex 2的区别?
回复此楼

» 猜你喜欢

» 抢金币啦!回帖就可以得到:

查看全部散金贴

已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

wgl2006

木虫 (正式写手)


Strong base anion resins are classed as type 1 and type 2.

Strong base anion type 1 resins contain a quaternized amine functional group, which is the more strongly basic functional group and has the

Greater affinity for the weak acids such as silicic acid and carbonic acid, that are commonly present during a water demineralization process.
Lower efficiency of regeneration of the resin to the hydroxide form, particularly when the resin is exhausted with monovalent anions, such as chloride and nitrate.
Particularly recommended for treating low FMA (Free Mineral Acid) water with high silica and where low silica leakage is required (~20 ppb in counter-current operation). The resin can be regenerated up to 50°C (122°F) for more effective silica removal.
Strong base anion resin type 2  functionality is obtained by the reaction of the styrene-DVB copolymer with dimethylethanolamine. This quaternary amine has lower basicity than that of the Type 1 resin, yet it is high enough to remove the weak acid anions for most applications.

The regeneration efficiency of a Type 2 resin is considerably greater than that of Type 1.
Chemical stability of the Type 2 resins is not as good as that of the Type 1 resins, the Type 1 resins being favored for high temperature applications.
Strong base anion resin type 2 is well suited for small plants, owing to its excellent regeneration efficiencies for water compositions where CO2 and SiO2 are <30% of the total feed anions.
Type 2 anions have a much better operating capacity and regeneration efficiency compared to Type 1,
Limited to lower temperature operation (<35°C/95°F caustic treatment) and have a higher SiO2 leakage (~50 ppb in counter-current operation.)
2楼2011-03-30 19:23:01
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖
相关版块跳转 我要订阅楼主 wgl2006 的主题更新
普通表情 高级回复 (可上传附件)
信息提示
请填处理意见