| 查看: 645 | 回复: 1 | |||
[交流]
【求助】Mg-Al-Si合金中Mg2Si汉字状变质 已有1人参与
|
| Mg-Al-Si合金中汉字状Mg2Si的变质，我用的是金属Sb变质，但是效果未达到其它文献上所述那种效果，我认为是熔炼的问题，求哪位高人指点，Si和Sb的加入方式（最好能说明原因），我的成分组成是Mg-12Al-0.7Si-0.3Sb，如果我想让其中Mg2Si变成细小颗粒状（大概4-5微米），Sb含量多少比较合适，非常感谢！ |
回复此楼» 猜你喜欢
综述论文作为代表作会不会影响评审专家的印象分？
已经有12人回复
-
2019年青年基金涵评意见，大家看看几个A，几个B?
已经有4人回复
-
应该是93bebmhtak前后十一个字符比较关键
已经有29人回复
-
奇怪，两个人的filecode固定段从头到尾一模一样
已经有9人回复
-
是这周出结果还是下周出结果？
已经有3人回复
-
小木虫上这么多卖论文的，真有人买论文么？感觉没必要啊
已经有9人回复
-
有时候，自然基金真的不能太认真 （我的申报经验）
已经有4人回复
-
帮忙看看fileCode
已经有13人回复
-
为什么网上很多人说本周 12号出结果
已经有7人回复
-
读博的好处
已经有3人回复
★
小木虫(金币+0.5):给个红包，谢谢回帖交流
小木虫(金币+0.5):给个红包，谢谢回帖交流
|
It is not always that Sb significantly modifies the morphology of Mg2Si in Mg alloys, for example, it has been reported that Sb has very limited modification effect on AZ61-0.7Si alloy. The Chinese script Mg2Si phase is also controlled by solidification rate, such that Mg2Si may always be Chinese script type if the solidification rate is too low. Therefore, it may be normal that you do not observe modification effect on your Mg-12Al-0.7Si-0.3Sb. Nevertheless, you may check if you have done the following items correctly: (1) Are your starting materials OK? Magnesium, Al and Sb should be at least 99.9%, Si should be added through Al-Si master alloy (for exp., Al-30%Si) rather than Si. (2) Is 0.3% Sb a good level for your specific alloy? Maybe 0.15, 0.45 and 0.6% should be tried. (3) Is your casting condition correct? A typical casting process for Mg alloys consists of - Melting Mg in graphite crucible at T = 720-750C with flux protection - Adding alloying elements (Al, Sb and Al-Si master alloy in your case) - Keeping the molten metal at T = 720-750C for 15-60 min - Stirring the molten metal for 2 min with stainless steel rod - Keeping the molten metal at T = 720-750C for 10-15 min to settle down oxidation and other contaminations - Pouring the molten metal through ceramic foam filter (if you have) with SF6 gas protection - Pouring the molten metal into pre-heated (150-200C) steel mould If you really cannot see modification effect, maybe you have to change 0.3%Sb to other concentrations, or, maybe Sb has no effect on Mg-12Al-0.7Si at all, then you have to try something else, such as Sr. Hopefully some of the above information is useful to you. [ Last edited by 金教授 on 2010-11-8 at 16:57 ] |
2楼2010-11-08 16:55:24
100