| 查看: 218 | 回复: 0 | |||
| 当前主题已经存档。 | |||
[交流]
【求助】哪位化工英文达人能帮我翻译下文献（我的英文水平实在不行）
|
|||
|
我的英文水平实在有限 翻译软件说实话在化工英文方面翻译的实在烂 所以希望哪位化工英文高手虫友能帮忙 我会非常感激~~ 这是一篇关于“水溶液中石墨烯氧化物大片层的制备”文章 Large-area ultrathin films of reduced graphene oxide as a transparent and flexible electronic material（标题） The integration of novel materials such as single-walled carbon nanotubes and nanowires into devices has been challenging, but developments in transfer printing and solution-based methods now allow these materials to be incorporated into large-area electronics1–6. Similar efforts are now being devoted to making the integration of graphene into devices technologically feasible7–10. Here, we report a solution-based method that allows uniform and controllable deposition of reduced graphene oxide thin films with thicknesses ranging from a single monolayer to several layers over large areas. The optoelectronic properties can thus be tuned over several orders of magnitude, making them potentially useful for flexible and transparent semiconductors or semi-metals. The thinnest films exhibit graphene-like ambipolar transistor characteristics, whereas thicker films behave as graphite-like semi-metals. Collectively, our deposition method could represent a route for translating the interesting fundamental properties of graphene into technologically viable devices. Electronic devices constructed from a single layer of graphite, referred to as graphene11, have received significant attention. Graphene is a 0 eV bandgap semiconductor in which the filled valence band touches the empty conduction band, thus giving rise to peculiar properties12 that could have particularly interesting applications in electronic devices13–16. The discovery of isolated graphene obtained from the simple mechanical cleaving ‘Scotch tape method’11 has made fabrication of devices on individual graphene sheets straightforward. Effort is also under way to grow large-area epitaxial graphene17,18. In addition, promising approaches based on transfer printing of exfoliated graphene onto electrodes on different substrates for large-scale integration have been reported recently7–9. In addition to individual sheet devices, efforts to obtain graphene-based composites through the reduction of graphene oxide (GO) in solution and incorporation into hosts have also yielded promising results19. Recently, there have been reports of non-composite reduction of GO into graphene using chemical routes and high-temperature annealing20–25. The chemical approach is appealing because it opens a route for the deposition of graphene from solution, allowing devices to be fabricated on virtually any surface. We describe a simple and reproducible method to uniformly deposit between one and five layers of graphene from reduced GO in the form of thin films to create transistors and proof-ofconcept electrodes for organic photovoltaics (see Supplementary Information). A GO aqueous suspension can be readily obtained from exfoliation of graphite through oxidation26,27 (see Methods). Methods such as drop casting20,24, rapid freezing by spraying21 and dip coating22 from GO suspension have been used to obtain isolated individual and multilayered sheets or thin films. In order to reproducibly achieve uniform thin films with a controllable number of GO layers over large areas, we have used the vacuum filtration method, which has been used widely to deposit highly uniform single-walled carbon nanotube (SWNT) thin films2,28,29. Vacuum filtration involves the filtration of a GO suspension through a commercial mixed cellulose ester membrane with an average pore size of 25 nm. As the suspension is filtered through the ester membrane, the liquid is able to pass through the pores, but the GO sheets become lodged. The permeation rate of the solvent is controlled by the accumulation of the GO sheets on the pores so as the number of GO layers increases at a given location on the porous membrane, the rate of filtration decreases, but does so to a lesser degree at thinner or uncovered regions. The process is therefore self-regulating, which allows reasonably good nanoscale control over the film thickness by simply varying either the concentration of the GO in the suspension or the filtration volume. The GO flakes on the filter membrane can then be transferred by placing the membrane with the film side down onto a substrate and dissolving the membrane with acetone, leaving behind a uniform GO thin film (see Methods for details). The yield of the transfer process is nearly 100%, independent of the substrate, indicating that van der Waals interactions give rise to sufficiently strong cohesive forces within the film and also between the GO sheets and the substrate to obtain a well adhered uniform film. Indeed, the as-deposited thin films of GO are able to withstand typical lithographic processes (rinsing, blowing with dry nitrogen and deposition of electrodes) without any evidence of delamination. A GO thin film covering an area of 10 cm2 on an ester membrane is shown in Fig. 1a, and transferred films on glass and plastic substrates are shown in Fig. 1b,c, respectively. The thicknesses obtained by atomic force microscope (AFM) profilometry, ellipsometry and Raman spectroscopy were found to be 1–2 nm for the films deposited at a filtration volume of 20 ml and 3–5 nm at 80 ml, suggesting that the thinnest films consist of single layers of GO (ref. 23) (concentration ¼ 0.33 mg l21; see Supplementary Information for experimental details and AFM images). It should be noted that pure single-layer graphene flake has a thickness of 0.34 nm, corresponding to the interlayer spacing of graphite, but a GO sheet is 1 nm thick due to the presence of functional groups, structural defects and adsorbed water molecules25,30. We also investigated the number of reduced GO layers using Raman spectroscopy by monitoring the second-order zone boundary phonons peak at 2,700 cm21, referred to as the G0 or 2D peak31 (see Methods). Raman spectra of reduced GO thin regions are clearly less visible in the 20 ml film. Our thickness results suggest that the thin films are uniformin that they contain 1–5 layers of reduced GO. However, the slight variation in thicknesses in Raman maps of both films point to the fact that a better control of the size and shape of the suspended GO sheets will be essential if films of exactly a single monolayer are to be deposited. After deposition, the insulating GO must be reduced to graphene through exposure to hydrazine vapour and/or annealing in inert conditions19–21,23–25,30,32 to render the material electrically conductive. We found that the hydrazine vapour alone is not sufficient to achieve maximum reduction, and annealing alone requires relatively high temperatures (.550 8C)22. Efficient reduction of the GO thin films was therefore achieved through a combination of hydrazine vapour exposure and low-temperature annealing treatment (see Supplementary Information for X-ray photoelectron spectroscopy (XPS) results)30,32. The reduction of GO yields thin films with properties resembling those of graphene. More interestingly, by controlling the amount of reduced GO on the surface, it is possible to tune the optoelectronic properties of the thin films as summarized in Fig. 3a,b. It can be seen from Fig. 3a that the sheet resistance of the hydrazine-treated GO thin films is independent of the filtration volume except at very high values (.300 ml). However, annealing at 200 8C in nitrogen (or vacuum) leads to a dramatic reduction in the sheet resistance (1 105 VA21). The lowest sheet resistance value we obtained was 43 kV A21. The saturation of sheet resistance in Fig. 3a above a critical filtration volume is probably due to the fact that reduction is only effective for the uppermost layers. The corresponding transmittances as a function of the filtration volume at l ¼ 550 nm for the asdeposited GO, chemically reduced GO and chemically reduced and annealed GO are shown in Fig. 3b (see Supplementary Information for transmission versus wavelength plots). It can be seen that the chemically reduced and annealed GO leads to a decrease in the transparency of thin films that is lower than that for reduced and non-annealed GO, also consistent with the increase in the Drude background obtained from spectroscopic ellipsometry (see Supplementary Information). In order to translate the opto-electronic properties into devices, we fabricated thin-film transistors (TFTs) with reduced GO thin films. Of the numerous (.100) TFT devices we tested, all showed uniform transfer characteristics regardless of the channel length (21 mm or 210 mm, SiO2 thickness ¼ 300 nm, channel width ¼ 400 mm). The relatively long channel lengths ensured that the transport was bulk limited and the role of contacts was not substantial in our devices. The transfer characteristics as a function of temperature for the 20 and 80 ml reduced GO thin films are shown in Fig. 4a,b, respectively, together with a photograph of the devices (Fig. 4c). The low-temperature measurements exhibit ambipolar characteristics, comparable to graphene. This is remarkable, because transport between the source and drain electrodes in our large-scale devices occurs over several graphene sheets. The p-type oxygen doping effect11, which increases the current and shifts the threshold voltage to positive voltages, is dramatically reduced for both the 20 ml and 80 ml devices when measurements are performed in vacuum. The primary differences between the two devices are that the current in the 80 ml TFTs is higher and the 20 ml device exhibits a sharper turn on behaviour, which is consistent with conduction occurring primarily through one or two layers of graphene. In addition, the ‘V’ shape of the ambipolar graphene transfer characteristics is more pronounced for the low-temperature measurements of the 20 ml TFTs, suggesting the semiconducting nature of the material. The mobility of the devices in ambient conditions calculated from the linear regime of the transfer characteristics (see Methods and Supplementary Information) was found to be 1 cm2 V21 s21 for holes and was lower at low temperatures. The electron mobilities ( 0.2 cm2 V21 s21) were generally lower than the hole mobilities at ambient conditions, and the reverse was true in vacuum. The lower overall mobilities in our devices compared to those achieved in individual reduced GO flakes (2–200 cm2 V21 s21) could be attributed to scattering at the junctions formed by overlapping flakes. The electron and hole currents from TFTs and conductivity versus temperature for the 20 ml thin films are shown in Fig. 4d,e, respectively. The temperature dependence is unusual but consistent with the anomalous behaviour found in exfoliated graphite33, in which conduction is metallic-like below 50 K and then crosses over to activated transport above this temperature. A method is reported for uniform and controllable deposition of 1–5 nm graphene thin films from solution at room temperature on a variety of substrates, from the reduction of GO. The vacuum filtration method allows the deposition of very thin films of 1–2 layers of reduced GO that are semiconducting, and thicker films that are semi-metallic. We have demonstrated that the sheet resistance of the thin films can be tuned over six orders of magnitude and the transparencies from 60 to 95%. The deposition of uniform thin films allows the simple fabrication of TFTs on various substrates without the use of extensive lithography. Our films typically show the presence of the usual D, G and 2D peaks31 (see Supplementary Information). The prominent D peak (absent in mechanically cleaved graphene) clearly indicates the presence of structural imperfections induced by the attachment of hyrodxyl and epoxide groups on the carbon basal plane. The intensity of the 2D peak with respect to the D and G peaks is small due to disorder, and thus requires care during acquisition and analysis. Nevertheless, the shift in this peak can be used as a simple non-destructive tool for analysing the number of layers in graphene31. Careful analysis of the spectra allowed us to monitor the 2D peak shifts and thus map the number of reduced GO layers in the thin films. The Raman maps over 15 mm 12 mm spatial regions for the 20 ml and 80 ml reduced GO thin films are shown in Fig. 2a and b. The 2D peak shift between one and more than five layers of graphene was found to be approximately 40 cm21 wavenumbers, as indicated by the actual measured peaks shown in Fig. 2c. The Raman maps are consistent with the AFM data in that the percolating regions consist of 1–2 and 3–5 layers in both the 20 and 80 ml thin films. However, it can be seen from Fig. 2a that 1–2 layers are more predominant in the 20 ml film compared to the 80 ml film, where 3–5 layers are more readily visible. In addition, thicker regions (.5 layers) are also visible in the Raman maps, which likely arise from incomplete exfoliation of GO in suspension24. The optical images of the 20 ml and 80 ml films are shown in Fig. 2d and e to indicate the degree of overlapping (darker regions) among the GO layers. The darker |
回复此楼» 猜你喜欢
2025冷门绝学什么时候出结果
已经有3人回复
-
天津工业大学郑柳春团队欢迎化学化工、高分子化学或有机合成方向的博士生和硕士生加入
已经有4人回复
-
康复大学泰山学者周祺惠团队招收博士研究生
已经有6人回复
-
AI论文写作工具：是科研加速器还是学术作弊器？
已经有3人回复
-
孩子确诊有中度注意力缺陷
已经有6人回复
-
2026博士申请-功能高分子，水凝胶方向
已经有6人回复
-
论文投稿，期刊推荐
已经有4人回复
-
硕士和导师闹得不愉快
已经有13人回复
-
请问2026国家基金面上项目会启动申2停1吗
已经有5人回复
-
同一篇文章，用不同账号投稿对编辑决定是否送审有没有影响？
已经有3人回复
» 本主题相关商家推荐: (我也要在这里推广)
