| 查看: 230 | 回复: 1 | |||
| 当前主题已经存档。 | |||
[交流]
PhD thesis
|
|||
|
下载地址：thinfilms@56.com 共享信箱 使用方法:先申请一个56信箱(去www.56.com申请)，登录后点击“共享资源”，填入thinfilms，即可看见共享电子书 *引用资料，请注明出处！！！ Title: Magnetron sputtered nc-TiN/a-SiNx nanocomposite thin films with high hardness and high toughness Summary: Nanocomposite thin films comprise at least two constituent phases, for example, a dispersed nanocrystalline phase and a matrix. The matrix phase can be either amorphous or nanocrystalline. Nanocomposite thin films represent a new class of materials which exhibit improved mechanical, electronic, magnetic and optical properties owing to the size effect. Of all the exotic properties of the nanocomposite thin films, hardness and toughness are the most important ones for the applications in manufacturing industry. So far, researchers are focusing more on hardness. Some even reach 105 GPa by forming nc-TiN/a-Si3N4 (where nanocrystalline titanium (nc-TiN) embedded in amorphous silicon nitride matrix (a-Si3N4)) nanocomposite thin films using chemical vapor deposition (CVD) method. However, in most wear related applications, hardness is only one of many important properties, such as high hardness, toughness, good oxidation resistance, and so on. This project focuses on the study of hardening and toughening mechanisms for nanocomposite thin films. The aim of this project is to study the relationship between microstructure, hardness and toughness, therefore to obtain a thin film with high hardness and at the same time high toughness. Reactive magnetron sputtering was used to prepare hard and superhard nc-TiN/a-SiNx nanocomposite thin films by co-sputtering Ti and Si3N4 targets in a gas mixture (argon and nitrogen). In order to improve the toughness of the as-prepared nanocomposite thin films, nickel was doped into the nc-TiN/a-SiNx to obtain Ni-toughened nc-TiN/a-SiNx nanocomposite thin films by co-sputtering TiNi, Ti and Si3N4 targets. Co-sputtering of multi targets allows to tailor the microstructure by adjusting the deposition parameters, such as target power density, deposition temperature, substrate bias, and gas ratio. The as-deposited Ni-toughened nc-TiN/a-SiNx nanocomposite thin films possess high hardness and high toughness. This project shows that superhard nc-TiN/a-SiNx nanocomposite thin films are obtainable by reactive magnetron sputtering. Silicon content has a significant effect on film topography, microstructure and mechanical properties. With 14.9 at.% Si, the nc-TiN/a-SiNx nanocomposite thin films possess an average hardness of 37 GPa. Refining grain size in the nanostructured thin films is the reason for the hardness increase. The toughness of the as-prepared nc-TiN/a-SiNx nanocomposite thin films is improved by doping nickel. Doping from 0 to 40 at.% Ni in nc-TiN/a-SiNx brings about an increase in toughness from 1.15 to 2.60 MPa m1/2 at an expense of hardness (dropped from 30 to 14 GPa). Ductile phase toughening through crack blunting and crack bridging is responsible for the toughness increase. |
回复此楼» 猜你喜欢
欢迎发来filecode的Mz6后的代码验证其规律
已经有123人回复
-
今天基金会出结果吗？20260819
已经有13人回复
-
时间戳变了，能看出什么问题？
已经有16人回复
-
filecode，4个jtjc了
已经有13人回复
-
为什么余额宝的年化利率越来越低？主要原因有哪些？
已经有5人回复
-
今天放榜没戏了吧
已经有5人回复
-
今天放榜吗？
已经有15人回复
-
filecode=后面第一个是大写字母
已经有12人回复
-
2027广东省杰青
已经有10人回复
-
朋友圈看到的
已经有8人回复
2楼2006-02-16 10:50:53
