24小时热门版块排行榜

返回列表

当前主题已经存档。

tjfwg

银虫 (著名写手)

应助: 14 (小学生)
金币: 450.1
散金: 571
红花: 1
帖子: 1545
在线: 233.4小时
虫号: 302926
注册: 2006-12-03
性别: MM
专业: 高分子材料结构与性能

[交流] 求Polymer投稿模板

哪位有polymer模板，其主页上有吗？
现在连不上Elsvier-Polymer.
参考文献格式可以是[1] (a)……（b）……形式吗？

先谢谢了？

回复此楼

» 猜你喜欢

1楼 2009-09-15 16:03:22

已阅回复此楼关注TA 给TA发消息送TA红花 TA的回帖

surnay

金虫 (正式写手)

应助: 0 (幼儿园)
金币: 629.2
散金: 19
帖子: 454
在线: 9.4小时
虫号: 556908
注册: 2008-05-11
专业: 金属结构材料

Basic guidelines for submitting artwork/illustrations: (For in-depth information about submitting electronic artwork see http://authors.elsevier.com/artwork)

1. TIFF or EPS files are the preferred format. Suggested packages for line graphics are Adobe Illustrator (version 3.0 or above), Freehand, and Corel Draw. Graphics made in WordPerfect or Word generally have too low a resolution. The minimum acceptable resolution for line art images is 1000 dpi. For halftones and halftone/line art combinations, the minimum resolutions are 300dpi (500dpi if lettering is present).

2. Black and white photos, micrographs etc should not be saved as colour.

3. Colour reproduction is available if the author is prepared to bear the additional reproduction and printing costs. A quotation will be provided on request. At the editors discretion colour may be provided at no cost to the author, if it is deemed essential to the clarity and presentation of the article. Colour illustrations should be scanned at 300 dpi (500 dpi for halftones/line art combinations).

4. For best results, illustrations should be prepared and submitted in the actual size at which they should appear in the journal and fit a single column width. Each illustration should have a maximum width of 8.25 cm (3.25 in.) and a maximum depth of 24 cm (9.5 in.). Only if it is absolutely necessary will a two-column width be allowed; this requires a minimum width of 10.5 cm (4.1 in.), a maximum width of 17.8 cm (7.1 in.) and a maximum depth of 22 cm (8.7 in.). The minimum font size for lettering appearing in a figure should be 6 pt; lines should be no thinner than 0.5 point and of uniform density. When original illustrations do need to be reduced to fit a single or double column, use larger lettering and thicker lines so that, when reduced, the artwork meets the above-mentioned parameters.

5. Chemical Structures should be produced with the use of a commercially available drawing package. No hand-drawn chemical structures will be accepted. Structures must fit a one- or, if absolutely necessary, two-column width on the journal page. Structures using the one-column width are highly preferred. The actual size at which they should appear in the journal will provide the best publication quality.

6. Should the image files require compression then the compression software used must be indicated.

赞一下

回复此楼

2楼2009-09-15 18:36:22

已阅回复此楼关注TA 给TA发消息送TA红花 TA的回帖

surnay

金虫 (正式写手)

应助: 0 (幼儿园)
金币: 629.2
散金: 19
帖子: 454
在线: 9.4小时
虫号: 556908
注册: 2008-05-11
专业: 金属结构材料

★ ★
tjfwg(金币+2,VIP+0): 9-15 19:07

References: Author(s) carry the full responsibility for the accuracy of their references. The format of references must be uniform and consistent with those found in a typical issue of Polymer. All publications cited in the text should be presented in a list of references following the text of the manuscript. In the text refer to references by a number in square brackets on the line (e.g. Kim and Michler [1]), and full reference should be given in a numerical list at the end of the paper in the following form:

1. Kim GM, Michler GH. Polymer 1998;39(23):5689-5697.
2. Jenkins AD, Loening KL. Nomenclature. In: Allen G, Bevington JC, Booth C, Price C, editors. Comprehensive polymer science, vol. 1. Oxford: Pergamon Press, 1989. pp. 13-54.
3. Van Krevelen DW. Properties of polymers, 3rd ed. Amsterdam: Elsevier, 1990 (chapter 6).

赞一下(1人)

回复此楼

3楼2009-09-15 18:37:43

已阅回复此楼关注TA 给TA发消息送TA红花 TA的回帖