24小时热门版块排行榜    

查看: 209  |  回复: 3
当前主题已经存档。

nandhutu

金虫 (正式写手)

[交流] 求2句话翻译

1.Electrochemical tests were performed on as-deposited thin films on nickel substrates which were cycled between 1.10 and 0.05 V vs. a lithium reference electrode. The two electrodes were separated by a glass filter paper wetted with a standard LiPF6 electrolyte dissolved in a 1:1 mixture of ethylene carbonate and dimethyl carbonate (Merck).

2.The mixture was stirred for 2 h, left to stand at 20℃for 24 h, heated at 80℃ for a further 24 h and finally left in a vacuum oven at 130℃ for 2 h. The resulting composite was then manually milled to the powder form.

» 猜你喜欢

已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

jiaql

木虫 (正式写手)

★ ★ ★
nandhutu(金币+3,VIP+0): 5-26 18:43
2. 将混合物搅拌2小时,于20℃放置24小时,然后进一步于80℃再保持24小时,最后于130℃在真空干燥箱中放置2小时。然后把所得产物研磨成粉末状。
2楼2009-05-25 14:28:30
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

jiaql

木虫 (正式写手)

★ ★ ★
nandhutu(金币+3,VIP+0): 5-26 18:43
1.
电化学实验在以镍为底物的沉积态薄膜上进行,循环电压为1.10 -0.05 V,锂电极作为参比电极。两个电极通过用标准LiPF6 电解质溶解于1:1的碳酸乙二酯和碳酸二甲酯所得混合溶液浸渍过的玻璃滤纸隔开, 。
3楼2009-05-25 14:43:26
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

liubencai

木虫之王 (文坛精英)

1. 电化学检测是在镍为底物的沉积态薄膜上进行的,循环电压在1.10-0.05V之间,锂电极作参比电极。两个电极被玻璃滤纸隔开,该滤纸是用溶解于碳酸亚乙酯和碳酸二甲酯 (Merck) 1:1的混合物的标准LiPF6电解质浸渍过的。
坚持到底
4楼2009-05-25 15:49:26
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖
相关版块跳转 我要订阅楼主 nandhutu 的主题更新
普通表情 高级回复 (可上传附件)
信息提示
请填处理意见