24小时热门版块排行榜

>论坛更新日志 (4555)
>导师招生 (184)
>文献求助 (179)
>虫友互识 (170)
>基金申请 (158)
>硕博家园 (106)
>考博 (93)
>博后之家 (88)
>休闲灌水 (48)
>找工作 (47)
>招聘信息布告栏 (40)
>论文投稿 (39)
>论文道贺祈福 (34)
>教师之家 (33)
>公派出国 (30)
>考研 (30)

返回列表

当前主题已经存档。

【有奖交流】积极回复本帖子，参与交流，就有机会分得作者刘智愚的 58 个金币

刘智愚

铁虫 (初入文坛)

应助: 0 (幼儿园)
金币: 4.5
帖子: 34
在线: 9分钟
虫号: 321102
注册: 2007-03-10
性别: GG
专业: environmental engineerin

[交流] 【求助】有学石油的大牛没？帮忙解一道题呗

PETROLEUM PRODUCTION ENGINEERING

Coursework 2 , submission date 8/05/09

Production

A section of core has been recovered from a reservoir, it has been tested in the laboratory and the following data obtained.

The core was first subject to solvent extraction and centrifugation.  The oil and water volumes recovered were;

Water 2.5ml
Oil 34.5ml

Next the core was coated with a thin latex membrane and immersed in water.  The displacement volume was 424ml. After permeability testing the entire core was crushed to below the observed grain size and the displacement volume of the crushed material was found to be 376ml.

A permeability test was conducted on the core using Water at 20oC.  The mean core diameter was 60mm and the core length 150mm.  The viscosity of water is taken as 1.0 x 10-3 Nsm-2.  During the test a series of measurements of the flowrate at different pressure differences has been recorded as follows;

Pressure difference(Bar) flow (cc/min)
1 37.8
2 75.6
3 114.5
4 144.0

The reservoir boundary pressure is 250 bar, the effective reservoir diameter is 300m and the vertical section is 50m. The production well diameter is 150mm and it is planned to operate with a well bottom pressure of 220bar.  The oil viscosity is 0.25 Nsm-2, the water viscosity is 0.001 Nsm-2 and the gas viscosity is 0.2 x 10-4 Nsm-2
Determine the approximate flows of gas and oil from the well.  Comment on the potential errors in this estimate.

Note; multi-phase flow charts are on the portal.

[ Last edited by 三个小石子 on 2009-11-30 at 22:15 ]

回复此楼