| 查看: 3454 | 回复: 0 | ||
[求助]
ANSYS/LS-DYNA隐式-显示分析
|
|
新人求助！ANSYS/LS-DYNA计算到预定求解时间停止，有结果，但是没有solution is done err文件提示 *** WARNING *** CP = 230.578 TIME= 22:46:02 ANSYS LS-DYNA run is done with 2 WARNING. Please check the message File. 部分message文件： *** Warning 70025 (OTH+25) Memory is set 1568304 words short increase the memory size to 24000000 expanding memory to 22683184 rigid body contracting memory to 21568944 contact friction expanding memory to 21568974 joints contracting memory to 21568974 accelerometers expanding memory to 21569074 rigid bodies for disp. termination contracting memory to 21569074 transformation to move nodes expanding memory to 22126402 interfac for file contracting memory to 21847740 thermal expansion 0 expanding memory to 21847742 flexible body 2 contracting memory to 21847742 implicit joints S t o r a g e a l l o c a t i o n Memory required to begin solution : 22683184 Additional dynamically allocated memory: 10605856 Total: 33289040 1 t 0.0000E+00 dt 1.99E-08 flush i/o buffers 01/04/18 22:24:58 101 t 2.1078E-06 dt 2.11E-08 write d3dump01 file 01/04/18 22:25:03 Use this restart dump if you want to restart the dynamic relaxation and re-converge to a tighter tolerance Use the next restart dump to restart as a transient analysis *** Warning 40515 (SOL+515) Velocities cannot be reinitialized after restart to account for geometry changes whenever: 1. "INIT" option is specified on command line during the initial run. 2. dynamic relaxation restart dumpfile is used to restart run. 1 t 0.0000E+00 dt 1.99E-08 flush i/o buffers 01/04/18 22:25:03 1 t 0.0000E+00 dt 1.99E-08 write ANSYS result file 01/04/18 22:25:03 2482 t 4.9988E-05 dt 1.99E-08 write ANSYS result file 01/04/18 22:27:20 4900 t 9.8307E-05 dt 2.00E-08 flush i/o buffers 01/04/18 22:29:23 4984 t 9.9987E-05 dt 2.00E-08 write ANSYS result file 01/04/18 22:29:27 7493 t 1.4999E-04 dt 1.99E-08 write ANSYS result file 01/04/18 22:31:29 9900 t 1.9797E-04 dt 2.00E-08 flush i/o buffers 01/04/18 22:33:28 10001 t 1.9999E-04 dt 2.00E-08 write ANSYS result file 01/04/18 22:33:33 12510 t 2.4998E-04 dt 2.00E-08 write ANSYS result file 01/04/18 22:35:39 14900 t 2.9763E-04 dt 2.00E-08 flush i/o buffers 01/04/18 22:37:38 15019 t 2.9999E-04 dt 1.99E-08 write ANSYS result file 01/04/18 22:37:44 17528 t 3.5000E-04 dt 2.00E-08 write ANSYS result file 01/04/18 22:39:51 19900 t 3.9739E-04 dt 1.99E-08 flush i/o buffers 01/04/18 22:41:48 20031 t 3.9999E-04 dt 1.99E-08 write ANSYS result file 01/04/18 22:41:55 22533 t 4.4998E-04 dt 2.00E-08 write ANSYS result file 01/04/18 22:43:58 24900 t 4.9733E-04 dt 1.99E-08 flush i/o buffers 01/04/18 22:45:54 25034 t 4.9999E-04 dt 1.99E-08 write ANSYS result file 01/04/18 22:46:01 *** termination time reached *** 25034 t 5.0001E-04 dt 1.99E-08 write d3dump02 file 01/04/18 22:46:01 25034 t 5.0001E-04 dt 1.99E-08 write ANSYS result file 01/04/18 22:46:01 N o r m a l t e r m i n a t i o n 01/04/18 22:46:01 S t o r a g e a l l o c a t i o n Memory required to complete solution : 22683184 Additional dynamically allocated memory: 10605870 Total: 33289054 T i m i n g i n f o r m a t i o n CPU(seconds) %CPU Clock(seconds) %Clock ---------------------------------------------------------------- Initialization ....... 9.0000E+00 0.71 9.4960E+00 0.75 Element processing ... 1.2440E+03 97.80 1.2416E+03 97.58 Binary databases ..... 1.9000E+01 1.49 2.1002E+01 1.65 ASCII database ....... 0.0000E+00 0.00 3.7000E-02 0.00 Contact algorithm .... 0.0000E+00 0.00 1.1000E-01 0.01 Contact entities ..... 0.0000E+00 0.00 0.0000E+00 0.00 Rigid bodies ......... 0.0000E+00 0.00 1.2900E-01 0.01 Implicit Nonlinear ... 0.0000E+00 0.00 0.0000E+00 0.00 Implicit Lin. Alg. ... 0.0000E+00 0.00 0.0000E+00 0.00 ---------------------------------------------------------------- T o t a l s 1.2720E+03 100.00 1.2723E+03 100.00 Problem time = 5.0001E-04 Problem cycle = 25034 Total CPU time = 1272 seconds ( 0 hours 21 minutes 12 seconds) CPU time per zone cycle = 225 nanoseconds Clock time per zone cycle= 225 nanoseconds Number of CPU's 1 NLQ used/max 136/ 136 Start time 01/04/2018 22:24:48 End time 01/04/2018 22:46:01 Elapsed time 1273 seconds( 0 hours 21 min. 13 sec.) for 25034 cycles N o r m a l t e r m i n a t i o n 01/04/18 22:46:01 |
回复此楼» 本帖附件资源列表
-
欢迎监督和反馈：小木虫仅提供交流平台，不对该内容负责。
本内容由用户自主发布，如果其内容涉及到知识产权问题，其责任在于用户本人，如对版权有异议，请联系邮箱：xiaomuchong@tal.com - 附件 1 : messag
- 附件 2 : file1_Explicit.k
2018-01-05 10:12:14, 10.86 K
2018-01-05 10:12:54, 37.28 M
» 猜你喜欢
面上合作单位盖章
已经有9人回复
-
面上函评意见出来了，像什么等级？
已经有17人回复
-
为什么国自然不能直接公布
已经有5人回复
-
梦想
已经有7人回复
-
学科评审组评审是指会评吗？
已经有4人回复
-
为什么资助数各大高校都创新高，自己申请怎么就这么难
已经有14人回复
-
小白求助 投论文要求的highlights应该如何写
已经有4人回复
-
麻烦专家们看看评委们的意见（F口面上）
已经有12人回复
-
怎么看青基中了没有啊
已经有6人回复
-
国社科又开始会评了，不知道这次命运如何
已经有11人回复
20