| 查看: 702 | 回复: 4 | ||
累的外焦里嫩铜虫 (小有名气)
|
[求助]
模拟温度远小于熔点温度，不知道是哪儿设置的不合适？
|
|
/filname,shiyan,1 /TITLE,LASER /PREP7 !* ET,1,70 !* ET,2,55 /UNITS,mks *SET,k,0.7 *SET,p,1300 *SET,R,0.03 *SET,q,p*k *SET,v,0.002 *SET,QM,3/3.1415/R**2*Q *SET,L,0.04 MPTEMP,,,,,,,, MPTEMP,1,100 MPTEMP,2,200 MPTEMP,3,300 MPTEMP,4,400 MPTEMP,5,500 MPTEMP,6,600 MPTEMP,7,700 MPTEMP,8,800 MPTEMP,9,900 MPTEMP,10,1000 MPDATA,KXX,1,,14.65 MPDATA,KXX,1,,15.91 MPDATA,KXX,1,,17.59 MPDATA,KXX,1,,18.84 MPDATA,KXX,1,,20.10 MPDATA,KXX,1,,21.77 MPDATA,KXX,1,,23.03 MPDATA,KXX,1,,24.28 MPDATA,KXX,1,,25.96 MPDATA,KXX,1,,27.63 MPTEMP,,,,,,,, MPTEMP,1,100 MPTEMP,2,200 MPTEMP,3,300 MPTEMP,4,400 MPTEMP,5,500 MPTEMP,6,600 MPTEMP,7,700 MPTEMP,8,800 MPTEMP,9,900 MPTEMP,10,1000 MPDATA,C,1,,437 MPDATA,C,1,,481 MPDATA,C,1,,493 MPDATA,C,1,,518 MPDATA,C,1,,542 MPDATA,C,1,,575 MPDATA,C,1,,700 MPDATA,C,1,,716 MPDATA,C,1,,729 MPDATA,C,1,,741 MPTEMP,,,,,,,, MPTEMP,1,100 MPTEMP,2,200 MPTEMP,3,300 MPTEMP,4,400 MPTEMP,5,500 MPTEMP,6,600 MPTEMP,7,700 MPTEMP,8,800 MPTEMP,9,900 MPTEMP,10,1000 MPDATA,DENS,1,,8240 MPDATA,DENS,1,,8240 MPDATA,DENS,1,,8240 MPDATA,DENS,1,,8240 MPDATA,DENS,1,,8240 MPDATA,DENS,1,,8240 MPDATA,DENS,1,,8240 MPDATA,DENS,1,,8240 MPDATA,DENS,1,,8240 MPDATA,DENS,1,,8240 MPTEMP,,,,,,,, MPTEMP,1,100 MPTEMP,2,200 MPTEMP,3,300 MPTEMP,4,400 MPTEMP,5,500 MPTEMP,6,600 MPTEMP,7,700 MPTEMP,8,800 MPTEMP,9,900 MPTEMP,10,1000 MPDATA,ENTH,1,,3.6e8 MPDATA,ENTH,1,,7.9e8 MPDATA,ENTH,1,,1.2e9 MPDATA,ENTH,1,,1.7e9 MPDATA,ENTH,1,,2.2e9 MPDATA,ENTH,1,,2.8e9 MPDATA,ENTH,1,,4.0e9 MPDATA,ENTH,1,,4.7e9 MPDATA,ENTH,1,,5.4e9 MPDATA,ENTH,1,,6.1e9 !* MPTEMP,,,,,,,, MPTEMP,1,100 MPTEMP,2,200 MPTEMP,3,300 MPTEMP,4,400 MPTEMP,5,500 MPTEMP,6,600 MPTEMP,7,700 MPTEMP,8,800 MPTEMP,9,900 MPTEMP,10,1000 MPDATA,KXX,2,,48.15 MPDATA,KXX,2,,46.47 MPDATA,KXX,2,,43.96 MPDATA,KXX,2,,41.45 MPDATA,KXX,2,,38.10 MPDATA,KXX,2,,35.17 MPDATA,KXX,2,,31.82 MPDATA,KXX,2,,25.96 MPDATA,KXX,2,,25.96 MPDATA,KXX,2,,26.8 MPTEMP,,,,,,,, MPTEMP,1,100 MPTEMP,2,200 MPTEMP,3,300 MPTEMP,4,400 MPTEMP,5,500 MPTEMP,6,600 MPTEMP,7,700 MPTEMP,8,800 MPTEMP,9,900 MPTEMP,10,1000 MPDATA,C,2,,7810 MPDATA,C,2,,7810 MPDATA,C,2,,7810 MPDATA,C,2,,7810 MPDATA,C,2,,7810 MPDATA,C,2,,7810 MPDATA,C,2,,7810 MPDATA,C,2,,7810 MPDATA,C,2,,7810 MPDATA,C,2,,7810 MPTEMP,,,,,,,, MPTEMP,1,100 MPTEMP,2,200 MPTEMP,3,300 MPTEMP,4,400 MPTEMP,5,500 MPTEMP,6,600 MPTEMP,7,700 MPTEMP,8,800 MPTEMP,9,900 MPTEMP,10,1000 MPDE,C,2 MPDATA,C,2,,485 MPDATA,C,2,,510 MPDATA,C,2,,552 MPDATA,C,2,,586 MPDATA,C,2,,653 MPDATA,C,2,,711 MPDATA,C,2,,854 MPDATA,C,2,,619 MPDATA,C,2,,544 MPDATA,C,2,,619 MPTEMP,,,,,,,, MPTEMP,1,100 MPTEMP,2,200 MPTEMP,3,300 MPTEMP,4,400 MPTEMP,5,500 MPTEMP,6,600 MPTEMP,7,700 MPTEMP,8,800 MPTEMP,9,900 MPTEMP,10,1000 MPDATA,DENS,2,,7810 MPDATA,DENS,2,,7810 MPDATA,DENS,2,,7810 MPDATA,DENS,2,,7810 MPDATA,DENS,2,,7810 MPDATA,DENS,2,,7810 MPDATA,DENS,2,,7810 MPDATA,DENS,2,,7810 MPDATA,DENS,2,,7810 MPDATA,DENS,2,,7810 MPTEMP,,,,,,,, MPTEMP,1,100 MPTEMP,2,200 MPTEMP,3,300 MPTEMP,4,400 MPTEMP,5,500 MPTEMP,6,600 MPTEMP,7,700 MPTEMP,8,800 MPTEMP,9,900 MPTEMP,10,1000 MPDATA,ENTH,2,,3.79e8 MPDATA,ENTH,2,,7.79e8 MPDATA,ENTH,2,,1.29e9 MPDATA,ENTH,2,,1.83e9 MPDATA,ENTH,2,,2.55e9 MPDATA,ENTH,2,,3.33e9 MPDATA,ENTH,2,,4.67e9 MPDATA,ENTH,2,,4.72e9 MPDATA,ENTH,2,,4.77e9 MPDATA,ENTH,2,,4.83e9 k,1,0,0,0 k,2,0.032,0,0 k,3,0.038,0,0 k,4,0.07,0,0 k,5,0.07,0.008,0 k,6,0.038,0.008,0 k,7,0.032,0.008,0 k,8,0,0.008,0 a,1,2,7,8 a,3,4,5,6 a,2,3,6,7 k,9,0.07,0.01,0 k,10,0.038,0.01,0 k,11,0.032,0.01 k,12,0,0.01 a,5,9,10,6 a,6,10,11,7 a,7,11,12,8 aglue,all nummrg,all numcmp,all (材料属性设置） lesize,1,,,20,1/3 lesize,5,,,20,3 lesize,7,,,20,1/3 lesize,6,,,20,1/3 lesize,6,,,5,1/3 lesize,2,,,5,1/3 lesize,4,,,5,3 lesize,8,,,5,3 lesize,3,,,20,3 lesize,12,,,20,1/3 lesize,16,,,20,3 lesize,11,,,3,1 lesize,13,,,3,1 lesize,15,,,3,1 lesize,17,,,3,1 lesize,10,,,20,1 lesize,9,,,20,1 extopt,esize,20,0 extopt,aclear,1 extopt,attr,1,0,0 vext,all,,,,,l vplot vglue,all nummrg,all numcmp,all 然后用高斯热源进行了求解但是所得到的温度场完全是错误的达不到熔点温度？是哪儿设置的不合适吗？  捕获.PNG |
回复此楼» 猜你喜欢
欢迎发来filecode的Mz6后的代码验证其规律
已经有19人回复
-
澳大利亚 Murdoch University 全奖博士招生（3个名额）地质化工冶金领域
已经有26人回复
-
阿姨
已经有4人回复
-
一作与独作在应聘高校教师时区别大吗
已经有4人回复
-
咱们一起用铁证分析2026国家社科基金中标与否
已经有9人回复
-
静等基金结果
已经有21人回复
-
FileCode能看出啥？
已经有28人回复
-
有时候，自然基金真的不能太认真 （我的申报经验）
已经有6人回复
-
filecode
已经有16人回复
-
重要来源：本周末出结果
已经有10人回复
» 本主题相关商家推荐: (我也要在这里推广)
huahua9918
至尊木虫 (著名写手)
- 应助: 16 (小学生)
- 金币: 10468.6
- 散金: 628
- 红花: 12
- 沙发: 1
- 帖子: 2706
- 在线: 1281.4小时
- 虫号: 2768149
- 注册: 2013-10-31
- 专业: 零件成形制造
累的外焦里嫩2楼2017-10-23 12:39:09
累的外焦里嫩
铜虫 (小有名气)
- 应助: 0 (幼儿园)
- 金币: 136.7
- 帖子: 88
- 在线: 45.2小时
- 虫号: 6185458
- 注册: 2017-03-29
- 性别: GG
- 专业: 粉末冶金与粉体工程
3楼2017-10-24 08:53:26
累的外焦里嫩
铜虫 (小有名气)
- 应助: 0 (幼儿园)
- 金币: 136.7
- 帖子: 88
- 在线: 45.2小时
- 虫号: 6185458
- 注册: 2017-03-29
- 性别: GG
- 专业: 粉末冶金与粉体工程
4楼2017-10-24 11:37:05
huahua9918
至尊木虫 (著名写手)
- 应助: 16 (小学生)
- 金币: 10468.6
- 散金: 628
- 红花: 12
- 沙发: 1
- 帖子: 2706
- 在线: 1281.4小时
- 虫号: 2768149
- 注册: 2013-10-31
- 专业: 零件成形制造
5楼2017-10-24 11:58:27
