24小时热门版块排行榜    

查看: 468  |  回复: 1

pzx2014

银虫 (小有名气)

[求助] 不锈钢点腐蚀实验一段话求翻译 已有1人参与

the current transients were measured in a deaerated 4 M NaCl solution at 80 C with an applied potential of 0.1 VSCE
at which metastable pitting can occur. The current transients were recorded at a sampling frequency of 10 Hz
during a period of 5400 s. The SEM was used to observe the pitting sites on the specimen after the potentiostatic
measurements.
回复此楼
打工是不可能打工的
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

yangfen0515

新虫 (小有名气)

【答案】应助回帖

在温度为80℃,浓度为4 M经除气处理的NaCl溶液中,采用电压为0.1V(SCE即采用饱和甘汞电极)测量了其瞬变电流,在电压0.1V时可以发生亚稳点蚀。在瞬变电流的测量过程中,采样频率为10 Hz,测量时间5400 s。样品经恒电位测量后,采用SEM(扫描电镜)观察了样品上的点蚀位置。
2楼2016-08-03 09:58:39
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖
相关版块跳转 我要订阅楼主 pzx2014 的主题更新
信息提示
请填处理意见