[交流] 用ANSYS PDS 做可靠性分析出现这个错误麻烦牛人看一下 已有1人参与

本人初学ANSYS PDS 模块在导入可靠性分析文件时出现图片所示提醒错误 程序如下：   LENGTH=200 WIDTH=30    LOAD500    SIGMA=200   DETSS=0 HALFWIDTH=WIDTH*0.5 /PREP7   R,1,5    MP,EX,1,2.1E8    MP,PRXY,1,0.3    MP,DENS,1,7.8E-6 K,1,180,15,0 PCIRC,25,,0,360 RECTNG,0,LENGTH,HALFWIDTH,-HALFWIDTH WPOFF,LENGTH,0,0 PCIRC,HALFWIDTH,,0,360   ET,1,SHELL63 RPR4,6,-LENGTH,0,HALFWIDTH,360   AADD,1,2,3   ASBA,5,4 ESIZE,3,0    MSHAPE,0,2D MSHKEY,0 AMESH,ALL    FINISH   /SOLU    CSYS,1   NSEL,S,LOC,Y,60 NSEL,A,LOC,Y,120 NSEL,A,LOC,Y,180 NSEL,A,LOC,Y,240 NSEL,A,LOC,Y360 NSEL,A,LOC,Y,300 NSEL,A,LOC,Y,360 NSEL,R,LOC,X,HALFWIDTH   D,ALL,ALL,0 CSYS,0   NSEL,S,LOC,X,LENGTH NSEL,R,LOC,Y,HALFWIDTH   F,ALL,FY,-LOAD   ALLSEL   SOLVE    FINISH   /POST1   NSORT,S,EQV *GET,MAXSTR,SORT,,MAX   DETSS=SIGMA-MAXSTR LGWRITE,RELIAB_BANSHOU,TXT FINISH L${[}DB]ABTZ$PXS_DS([Q3.jpg

回复此楼