24小时热门版块排行榜

返回列表

【奖励】本帖被评价254次，作者堕落的鱼9297增加金币 200.4 个

本帖产生 1 个 ECEPI ，点击这里进行查看

当前只显示满足指定条件的回帖，点击这里查看本话题的所有回帖

堕落的鱼9297

木虫 (正式写手)

ECEPI: 2
应助: 11 (小学生)
金币: 3926.3
帖子: 412
在线: 382.4小时
虫号: 610758

[资源] 2013年John B. Goodenough在jacs上的一篇综述

英文水平有限，怕翻译不伦不类，直接上英文的.....
The Li-ion Rechargeable Battery: A Perspective
Abstract Each cell of a battery stores electrical energy as chemical energy in two electrodes, a reductant (anode) and an oxidant (cathode), separated by an electrolyte that transfers the ionic component of the chemical reaction inside the cell and forces the electronic component outside the battery. The output on discharge is an external electronic current I at a voltage V for a time Δt. The chemical reaction of a rechargeable battery must be reversible on the application of a charging I and V. Critical parameters of a rechargeable battery are safety, the density of energy that can be stored at a specific power input and retrieved at a specific power output, the cycle and shelf life, the storage efficiency, and the cost of fabrication. Conventional ambient-temperature rechargeable batteries have solid electrodes and a liquid electrolyte. The positive electrode (cathode) consists of a host framework into which the mobile (working) cation is inserted reversibly over a finite solid-solution range. The solid-solution range, which is reduced at higher current by the rate of transfer of the working ion across electrode/electrolyte interfaces and within a host, limits the amount of charge per electrode formula unit that can be transferred over the time Δt = Δt(I). Moreover, the difference between the energies of the LUMO and the HOMO of the electrolyte, i.e. the electrolyte window, determines the maximum voltage for a long shelf and cycle life. The maximum stable voltage with an aqueous electrolyte is 1.5 V; the Li-ion rechargeable battery uses an organic electrolyte with a larger window, which increase the density of stored energy for a given Δt. Anode or cathode electrochemical potentials outside the electrolyte window can increase V, but they require formation of a passivating surface layer that must be permeable to Li+ and capable of adapting rapidly to the changing electrode surface area as the electrode changes volume during cycling. A passivating surface layer adds to the impedance of the Li+ transfer across the electrode/electrolyte interface and lowers the cycle life of a battery cell. Moreover, formation of a passivation layer on the anode robs Li from the cathode irreversibly on an initial charge, further lowering the reversible Δt. These problems plus the cost of quality control of manufacturing plague development of Li-ion rechargeable batteries that can compete with the internal combustion engine for powering electric cars and that can provide the needed low-cost storage of electrical energy generated by renewable wind and/or solar energy. Chemists are contributing to incremental improvements of the conventional strategy by (1) investigating and controlling electrode passivation layers, (2) improving the rate of Li+ transfer across electrode/electrolyte interfaces, (3) identifying electrolytes with larger windows while retaining a Li+ conductivity σLi > 10-3 S cm-1, (4) synthesizing electrode morphologies that reduce the size of the active particles while pinning them on current collectors of large surface area accessible by the electrolyte, (5) lowering the cost of cell fabrication, (6) designing displacement-reaction anodes of higher capacity that allow a safe, fast charge, (7) designing alternative cathode hosts. However, new strategies are needed for batteries that go beyond powering hand-held devices. These strategies include (1) the use of electrode hosts with two-electron redox centers, (2) replacing the cathode hosts (a) by materials undergoing displacement reactions, e.g. sulfur, (b) by liquid cathodes that may contain flow-through redox molecules, (c) by catalysts for air cathodes, and /or (3) by the development of a Li+ solid electrolyte separator membrane that allows an organic and aqueous liquid electrolyte on the anode and cathode sides, respectively. Opportunities exist for the chemist to bring together oxide and polymer or graphene chemistry in imaginative morphologies.

回复此楼

» 本帖附件资源列表

欢迎监督和反馈：小木虫仅提供交流平台，不对该内容负责。
本内容由用户自主发布，如果其内容涉及到知识产权问题，其责任在于用户本人，如对版权有异议，请联系邮箱：xiaomuchong@tal.com
附件 1 : ja3091438.pdf

2013-01-10 10:58:11, 1.18 M

» 收录本帖的淘帖专辑推荐

» 猜你喜欢

» 本主题相关价值贴推荐，对您同样有帮助:

明天就是John B. Goodenough教授的90岁生日！已经有67人回复
John B. Goodenough在Acc. Chem. Res.上的最新综述-现代可充电电池的策略演化已经有440人回复
Goodenough2010年综述文献的翻译已经有22人回复
【资源】锂电池超级大牛J. B. Goodenough的最新JACS文章201103 已经有67人回复
【讨论】Prof. John.B.Goodenough的传奇人生已经有43人回复

1楼2013-01-10 10:59:20

已阅回复此楼关注TA 给TA发消息送TA红花 TA的回帖

相关版块跳转我要订阅楼主堕落的鱼9297 的主题更新

返回列表