24小时热门版块排行榜    

查看: 953  |  回复: 2
当前只显示满足指定条件的回帖,点击这里查看本话题的所有回帖

yhy00111

金虫 (小有名气)

715525563

[求助] Tucker’s试剂的具体成分是什么?

铝合金腐蚀剂:Tucker’s试剂的具体成分是什么?我只知道KELLS 试剂。哪位高手出来指点一下,谢了!
回复此楼
做自信的自我
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

zuokesh

金虫 (小有名气)

One of the panel members received the following information from a researcher in the Czech Republic who works for the Research Institute for Metals and presented a paper about Al 8006 at the 1999 IMS convention:

"We really use Barker's reagent (4 to 5 ml fluoroboric acid in 200ml water), electrolytic anodizing at 20 to 22V during 90 to 180s and then we examine the samples under crossed polarizer and analyzer with sensitive tint."

She also sent along the following preparation procedures for other aluminum alloys:

"We use the most often cold mounting in acrylic compounds, wet grinding on SiC papers - the usual set is P220, P500, P800, P1200, then coarse polishing on diamond suspensions - 7, 3 and 1 microns and final polishing on silica suspension (Buehler MASTERMET 2).
The etchants we use more frequently for macroetching are:
- Tucker's reagent: HCl - 45 ml, HF - 15ml, HNO3 - 15 ml, H2O - 25 ml
- 10 to 20% aqueous solution of NaOH followed by rinsing in 50% aqueous solution of HNO3
- diluted Tucker: 300 ml HCl, 300 ml HNO3, 5 ml HF, 300 ml H2O
Microetching reagents:
- 0.5% aqueous solution of HF
- 30% aqueous solution of HNO3
- Dix-Keller reagent: 1 ml HF, 1.5 ml HCl, 2.5ml HNO3, 95 ml H2O"
3楼2022-06-29 20:59:14
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖
查看全部 3 个回答

yhy00111

金虫 (小有名气)

715525563

有高手吗?还请指导一下
做自信的自我
2楼2012-08-17 18:01:36
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖
信息提示
请填处理意见