24小时热门版块排行榜

南方科技大学公共卫生及应急管理学院2025级博士研究生招生报考通知

返回列表

当前只显示满足指定条件的回帖，点击这里查看本话题的所有回帖

天堂初秋

金虫 (正式写手)

应助: 5 (幼儿园)
金币: 596.2
帖子: 323
在线: 73.4小时
虫号: 933113

[交流] 硒化镉量子点合成遇到的问题

各位大虾，小弟做量子点合成遇到了些问题....
sensitizer could be increased by repeating the assembly cycle.
For CdSe sensitizer, the anion source was sodium selenosulfate
(Na2SeSO3) solution, which was prepared by refluxing 0.3 M Se
and 0.6 M Na2SO3 in an ethanol/Milli-Q ultrapure water (3:7)
solution at 70 C for 2 h.

然后把阳极放在前驱物溶液中，加热到50℃来回循环。

我是先把2.3688g的硒粉和15.0403g的硫代硫酸钠放入250ML的三口烧瓶中，先加35ML水，然后加入15ml的甲醇，70摄氏度两个小时，但是还有好多硒粉没有溶解呢...，又加了21ml水和9ml甲醇，溶解了一会儿，还是不行、、、、、请问难道是加的顺序的问题么

还有一个问题，在前驱物中泡着，然后加热到50摄氏度，文献让泡20MIN，这让溶剂挥发好多啊。
请做过的大虾指导！！
另一个问题，是硫化镉掺锰之后禁带宽度能有多大，如果做成硒化镉硫化镉的核壳结构，是否还是把硫化镉掺锰的量子点当做核。

另The photoactive semiconductor electrodes were prepared by
successive ionic layer adsorption and reaction (SILAR)
method.29−31 In brief, 0.1 M cadmium nitrate in methanol
was used as cation source and 0.1 M sodium sulfide in 1:1
methanol and water as anion source. To incorporate doping of
Mn2+, manganese acetate (0.075 M) was mixed with cadmium
nitrate. This allowed coadsorption of Mn2+ and Cd2+ ions,
which in turn facilitated incorporation of Mn2+ in the CdS film.
Each cycle of SILAR consists of successive immersion of the
FTO glass electrode, precoated with transparent active TiO2
layer and a scattering layer,14,32 in metal ion and sulfide (or
selenide) anion solutions for 1 min. The cadmium and selenide
ion precursor solution for CdSe was prepared by mixing 0.03 M
cadmium nitrate and 0.03 M selenium oxide, respectively, with
0.06 M sodium borohydride, in degassed ethanol inside a glove
box under N2 atmosphere. All the working electrodes were
finally coated with 2 cycles of ZnS. The counter electrode was
prepared by doctor blading Cu2S and reduced graphene oxide
(RGO) composite on FTO glass.

为什么工作电极上还要循环两次硫化锌，是因为怕电子和电解液复合了么，谢谢！

回复此楼