24小时热门版块排行榜    

CyRhmU.jpeg
查看: 2948  |  回复: 13
当前只显示满足指定条件的回帖,点击这里查看本话题的所有回帖

632280562

银虫 (小有名气)

[求助] CASTEP在计算是出现问题啦,求大侠帮忙啊。。。

我的CASTEP在计算前面几个材料的时候都挺好的,可是再计算一个新的就出现问题啦,具体表现在不能进行几何优化,我变换了一下截断能以及k-point 都不行,软件提示为:
Warning: There are no empty bands for at least one kpoint and spin; this may
          slow the convergence and/or lead to an inaccurate groundstate.
          If this warning persists, you should consider increasing nextra_bands
          and/or reducing smearing_width in the param file.
          Recommend using nextra_bands of 6 to 13.
还请那位大侠帮忙解决一下啊,谢谢啦!!!
回复此楼

» 收录本帖的淘帖专辑推荐

第一原理资料汇编

» 猜你喜欢

» 本主题相关商家推荐: (我也要在这里推广)

» 本主题相关价值贴推荐,对您同样有帮助:

已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

632280562

银虫 (小有名气)

引用回帖:
: Originally posted by lbambool at 2012-03-11 21:44:12:
设定计算条件时,点一下files,然后在弹出窗口里点击save files,这样会把输入条件以文件的形式存下来,点开那个****.param文件,然后按提示把 nextra_bands 值从 6改为 13。
increasing nextra_bands
reducing ...

nextra_bands和 reducing smearing值在那个地方修改啊,我目前还没有找到啊??呵呵
4楼2012-03-12 08:55:54
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

632280562

银虫 (小有名气)

送鲜花一朵
引用回帖:
6楼: Originally posted by nan1026feng at 2012-03-13 15:51:54:
我曾经也遇到过这个问题,在计算金属材料的时候都需要增加空带或者减小smearing值,具体方法是run——files——save files(project下面会多几个文件)——打开**.param——找到上面提到的那两个参数,并做相应更 ...

可是目前我的smearing值是0.1     如果要减小的话还要减小到什么程度啊!还望您指教,呵呵!!谢谢
7楼2012-03-14 10:39:41
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

632280562

银虫 (小有名气)

引用回帖:
7楼: Originally posted by 632280562 at 2012-03-14 10:39:41:
可是目前我的smearing值是0.1     如果要减小的话还要减小到什么程度啊!还望您指教,呵呵!!谢谢

现在我的计算有一个已经解决了,是通过按照Warning增大空带值,就可以计算啦!!可是还有一个还是不行啊???求解啊
8楼2012-03-14 10:41:47
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

632280562

银虫 (小有名气)

引用回帖:
8楼: Originally posted by 632280562 at 2012-03-14 10:41:47:
现在我的计算有一个已经解决了,是通过按照Warning增大空带值,就可以计算啦!!可是还有一个还是不行啊???求解啊

我在增大空带值之后又出现了新的问题,求解啊!!
********************************************************
  Warning: electronic minimisation did not converge during
           finite basis set correction.
  ********************************************************
Checkpoint file cannot be written.
Error calculate_finite_basis : Convergence failed when doing finite basis set correction.
Current trace stack:
calculate_finite_basis_corr
check_elec_ground_state
castep
Error calculate_finite_basis : Convergence failed when doing finite basis set correction.
Current trace stack:
calculate_finite_basis_corr
check_elec_ground_state
castep
Error calculate_finite_basis : Convergence failed when doing finite basis set correction.
Current trace stack:
calculate_finite_basis_corr
check_elec_ground_state
castep
Error calculate_finite_basis : Convergence failed when doing finite basis set correction.
Current trace stack:
calculate_finite_basis_corr
check_elec_ground_state
castep
MPI Application rank 0 exited before MPI_Finalize() with status 1
9楼2012-03-14 10:42:48
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖
相关版块跳转 我要订阅楼主 632280562 的主题更新
信息提示
请填处理意见