24小时热门版块排行榜    

CyRhmU.jpeg
查看: 7303  |  回复: 25
当前只显示满足指定条件的回帖,点击这里查看本话题的所有回帖

Snow LGF

新虫 (初入文坛)

[求助] 关于三元材料XRD的一些问题已有5人参与

1、关于文献当中的三元材料峰强,到底是峰的高度还是峰的面积?
2、对于三元材料,为什么(003)/(104)的值大于1.2 就是混排不严重?
3、对于三元材料,为什么(006, 102) 和 (108, 110)分裂就是层状结构的象征?
以上问题求各位大神回答,文献看吐了都没有找到答案,全都是直接引用这些结果,但是老板又次次汇报都问我,我都快哭了。。。。 @Gamry-电化学
回复此楼
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

lliang157

木虫 (著名写手)


低调小弟: 金币+1 2016-11-24 19:15:39
引用回帖:
9楼: Originally posted by xmq135828 at 2016-11-07 22:03:19
104晶面是Li/TM均匀分布的面
是有文献明确提出过吗?
求教...

For the layered rhombohedral structure, if we define foct1 as the average atomic-scattering power at the lithium octahedral sites, foct2 as the average atomic-scattering power at transitionmetal octahedral sites, and fO as the atomic-scattering power of oxygen that builds up the skeleton, then the structural factors for the rhombohedral-(003)R and (104)R peaks can be calculated, respectively, as (3foct1– 3foct2– 1.1fO), and (3foct1 + 3foct2 + 5.8fO). The migration of transition metals from their own layer
to the lithium layer greatly increases foct1 due to the much larger atomic-scattering power of the transition metals. Since
the foct1 and foct2 have opposite signs for the (003)R peak, the increased foct1 will reduce significantly the amplitude square of
Fhkl. In contrast, foct1 and foct2 have the same signs in the structure factor of the (104)R peak, and therefore, the increase of foct1 will engender an increase in the amplitude square of Fhkl for the (104)R peak. This is the origin of using the intensity ratio of the (003) to (104) peaks to indicate the degree of cation mixing (transition metals in lithium-layer sites). During the initial stage of heating, the reducing intensity ratio of the (003)R to (104)R peaks in the TR-XRD patterns clearly denotes the migration of
transition metal cations into the lithium layers where vacancies had been created during the overcharge process
13楼2016-11-23 14:41:13
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖
查看全部 26 个回答

ywuweizi

版主 (著名写手)

【答案】应助回帖


感谢参与,应助指数 +1
louderbe: 金币+1 2016-11-07 13:35:16
1、关于文献当中的三元材料峰强,到底是峰的高度还是峰的面积?
严格说是积分面积,通常是高度比
2、对于三元材料,为什么(003)/(104)的值大于1.2 就是混排不严重?
小于1.2,混排严重,电化学性能差。一般来说,比值越大越好。
3、对于三元材料,为什么(006, 102) 和 (108, 110)分裂就是层状结构的象征?
两对峰分裂明显,暗示层状结构完整,结晶度高
2楼2016-11-06 16:18:06
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

Snow LGF

新虫 (初入文坛)

引用回帖:
2楼: Originally posted by ywuweizi at 2016-11-06 16:18:06
1、关于文献当中的三元材料峰强,到底是峰的高度还是峰的面积?
严格说是积分面积,通常是高度比
2、对于三元材料,为什么(003)/(104)的值大于1.2 就是混排不严重?
小于1.2,混排严重,电化学性能差。一般来 ...

谢谢你的回复,可是我觉得这回复还是现象,我想知道最根本的原因
3楼2016-11-06 16:29:27
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖

ywuweizi

版主 (著名写手)

引用回帖:
3楼: Originally posted by Snow LGF at 2016-11-06 16:29:27
谢谢你的回复,可是我觉得这回复还是现象,我想知道最根本的原因...

查看文献吧,都有说明
4楼2016-11-06 16:54:33
已阅   回复此楼   关注TA 给TA发消息 送TA红花 TA的回帖
信息提示
请填处理意见