| 查看: 285 | 回复: 0 | |||
[求助]
帮翻译
|
|
3.2. Shapes of the mandrel and workpiece In a conventional spinning process, the final shape of the product is almost identical to that of the mandrel used. In this study, a man-drel having the shape of a truncated elliptical cone is used in the first trial experiment on asymmetric spinning so that the experimental results can be easily compared with those obtained in axisymmetric cone spinning. The shape and dimensions of the asymmetric man-drel (truncated elliptical cone), axisymmetric mandrel (truncated cone), and roller are shown in Fig. 3. The half-cone angle of the man-drel, ˇ, is set to 60◦ and one-path spinning was successfully carried out. The roller is equipped with a ball bearing at its center to reduce friction generated during its rotation in the spinning process. Cold-rolled commercially available pure aluminum sheets (composition: Si 0.11 wt%, Fe 0.51 wt%, Cu 0.12 wt%, and Ti 0.03 wt%) with a thickness of 1 mm were used in this study. The shapes of the metal sheets (workpieces) used for asymmetric and axisymmetric spinning are shown in Fig. 4. The long axis of the elliptical workpiece was aligned parallel to the rolling direction. Prior to their use in the spinning experiments, the workpieces were annealed at 673 K for 1 h for elimination of residual stress. The mechanical properties of the materials obtained by carrying out uniaxial tensile tests on three specimens, whose axis are aligned at 0◦ , 45◦ , and 90◦ to the rolling direction are summarized in Table 2. |
回复此楼» 猜你喜欢
带资进组求博导收留
已经有10人回复
-
最近几年招的学生写论文不引自己组发的文章
已经有11人回复
-
写了一篇“相变储能技术在冷库中应用”的论文，论文内容以实验为主，投什么期刊合适？
已经有4人回复
-
需要合成515-64-0，50g，能接单的留言
已经有3人回复
-
中科院杭州医学所招收博士生一名（生物分析化学、药物递送）
已经有3人回复
-
临港实验室与上科大联培博士招生1名
已经有8人回复
-
想换工作。大多数高校都是 评职称时 认可5年内在原单位取得的成果吗？
已经有4人回复